Hand Tools, Nonedged, Nonpowered

Hand Tools, Nonedged, Nonpowered

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches. Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Stock Items with Pictures

Stock Items From Supply Class 5120 starting at NIIN 000179991

NSNNameStatus
5120-00-001-2642     ADAPTER,TORQUE WRENCH
5120-00-001-2644     ADAPTER,TORQUE WRENCH
5120-00-001-2650     INSERTER,SEAL
5120-00-001-2651
5120-00-001-2652     INSTALLING TOOL,SHAFT
5120-00-001-2653     REMOVER,PREFORMED PACKING
5120-00-001-2654     REMOVER,PREFORMED PACKING
5120-00-001-2655     SOCKET,WRENCH,FACE SPANNER
5120-00-001-2656     SOCKET,WRENCH,FACE SPANNER
5120-00-001-2657     SOCKET,WRENCH,FACE SPANNER
5120-00-001-2658     SOCKET,WRENCH,FACE SPANNER
5120-00-001-2659     PUSHER TOOL,VENT VALVE
5120-00-001-2660     RESTRAINT TOOL,SHROUD
5120-00-001-2668
5120-00-001-2670     SOCKET,WRENCH,FACE SPANNER
5120-00-001-2677     DRIFT PIN
5120-00-001-2678     INSERTER AND REMOVER,BEARING AND BUSHING
5120-00-001-2679     INSERTER,BEARING AND BUSHING
5120-00-001-2680     WRENCH,SPANNER
5120-00-001-2688
5120-00-001-2689     ADJUSTING TOOL,PROBE
5120-00-001-2701     JACK ASSEMBLY,CONSOLE PALLET
5120-00-001-3726     CRIMPING TOOL,TERMINAL,HAND
5120-00-001-3727     CRIMPING TOOL,TERMINAL,HAND
5120-00-001-3729     CRIMPING TOOL,TERMINAL,HAND
5120-00-001-3732
5120-00-001-3733     WRENCH,TORQUE
5120-00-001-3734     SOCKET,WRENCH,FACE SPANNER
5120-00-001-4090     ADAPTER,TORQUE WRENCH
5120-00-001-4091     ADAPTER,TORQUE WRENCH
5120-00-001-5579     WRENCH,SPANNER
5120-00-001-5582     WRENCH,TORQUE
5120-00-001-5583     WRENCH,TORQUE
5120-00-001-5591     ADAPTER TOOL,VALVE TEST
5120-00-001-5592     EXTRACTOR,SLEEVE
5120-00-001-5593     EXTRACTOR,SLEEVE
5120-00-001-5594
5120-00-001-5595     STAKING TOOL,PISTON RETAINER
5120-00-001-5596
5120-00-001-6356
5120-00-001-6503     ALIGNMENT TOOL,ELECTRONIC EQUIPMENT
5120-00-001-6940     ALIGNMENT TOOL,ELECTRONIC EQUIPMENT
5120-00-001-7022     FLARING TOOL,TIEROD NUT
5120-00-001-7023     PULLER,MECHANICAL
5120-00-001-7024     WRENCH,SPANNER
5120-00-001-7035     WRENCH,RETAINING NUT
5120-00-001-7036     PULLER,SEAL RING
5120-00-001-7037     INSERTER,BEARING AND BUSHING
5120-00-001-7038     INSERTER,BEARING AND BUSHING
5120-00-001-7039     INSERTER AND REMOVER,BEARING AND BUSHING
5120-00-001-7040     EXPANDER,TUBING
5120-00-001-7041     EXPANDER,TUBING
5120-00-001-7047
5120-00-001-7048
5120-00-001-7051     WRENCH,SPANNER
5120-00-001-7052     ADAPTER TOOL,RETAINING NUT
5120-00-001-7053     WRENCH,RETAINING NUT
5120-00-001-7054     WRENCH,SPANNER
5120-00-001-7055     ADAPTER TOOL,REAR HUB
5120-00-001-7056
5120-00-001-7057
5120-00-001-7058
5120-00-001-7069
5120-00-001-9261
5120-00-001-9545     CLINCHER,CORNERBEAD,DRYWALL
5120-00-001-9659     ADAPTER SET,TORQUE
5120-00-001-9954     INSERTER,BEARING AND BUSHING
5120-00-002-4790
5120-00-003-0527
5120-00-003-0532     WRENCH,VENT
5120-00-003-1507     REMOVAL TOOL,PUMP
5120-00-003-1508     ALIGNMENT TOOL
5120-00-003-1511     INSTALLATION TOOL,F
5120-00-003-1517     WRENCH,SPANNER
5120-00-003-1518     PULLER,CIRCUIT CARD
5120-00-003-1536     BUTTON,DEBURRING TOOL
5120-00-003-1539     BUTTON,DEBURRING TOOL
5120-00-003-2220     WRENCH SET,SOCKET
5120-00-003-2252     SEATING TOOL,BEARING OUTER RACE
5120-00-003-2253     SEATING TOOL,BEARING PACKAGE
5120-00-003-2254     PULLER,MECHANICAL
5120-00-003-2255     DRIFT,SHAFT LINER
5120-00-003-2256     DRIFT PIN
5120-00-003-2257
5120-00-003-2258     INSERTER AND REMOVER,BEARING AND BUSHING
5120-00-003-2259     REMOVAL TOOL,DRIVE SHAFT BAFFLE
5120-00-003-2260     FLARING TOOL,SEAT
5120-00-003-2263     WRENCH,ADJUSTABLE
5120-00-003-2264     SEATING TOOL,LUG BU
5120-00-003-2265     SEATING TOOL,SHAFT BEARING
5120-00-003-2266     CRIMPING TOOL,CUP WASHER
5120-00-003-2285     WRENCH ASSEMBLY,ADAPTER
5120-00-003-5861
5120-00-003-5863     WRENCH,SPANNER
5120-00-003-5865     REPLACER,OUTER CUP
5120-00-003-6405     RETAINER ASSY,SWAGE
5120-00-003-6415
5120-00-003-6436     ADAPTER,LOCATOR
5120-00-003-7454
5120-00-003-7466     PUSHER,GEARBOX BRA
5120-00-003-7467     PULLER,MECHANICAL
5120-00-003-7468     WRENCH,GEARBOX BEARING RETAINING NUT
5120-00-003-7469     DISASSEMBLY TOOL,GEARBOX BEARING RACE
5120-00-003-7470     ALIGNING TOOL,ROTATING MEMBERS
5120-00-003-7471     WRENCH,BEARING NUT
5120-00-003-7472     ALIGNING TOOL,ROTATING MEMBERS
5120-00-003-7473     REMOVER,BEARING AND BUSHING
5120-00-003-7474     ALIGNING TOOL,ROTATING MEMBERS
5120-00-003-7491     INSTALLATION TOOL,PLATFORM BUMPER
5120-00-003-7498     CRIMPING TOOL,TERMINAL,HAND
5120-00-003-7499     SCREWDRIVER KIT,TOR *
5120-00-003-7502
5120-00-003-7503
5120-00-003-7534     INSTALLATION TOOL,SHAFT ASSEMBLY
5120-00-003-7542     DISASSEMBLY TOOL,SEAL HOUSING
5120-00-003-7548     DISASSEMBLY TOOL,IDLER STUB-GEAR ASSEMBLY
5120-00-003-7549     DRIFT PIN
5120-00-003-7550     ALIGNING TOOL,ROTATING MEMBERS
5120-00-003-7551     REMOVER,BEARING AND BUSHING
5120-00-003-7552     WRENCH,GEARBOX OUTER RACE RETAINING NUT
5120-00-003-7553
5120-00-003-7554     REMOVER,BEARING AND BUSHING
5120-00-003-8983     CRIMPING TOOL,TERMINAL,HAND
5120-00-003-9541
5120-00-003-9542     WRENCH,DRAIN PLUG
5120-00-003-9865     WRENCH,SPANNER
5120-00-003-9878     ADAPTER,TORQUE WRENCH
5120-00-003-9884
5120-00-003-9885     WRENCH SET,BIMETAL
5120-00-003-9886     WRENCH,WEDGE RETAINING RING
5120-00-003-9887     WRENCH,SPECIAL
5120-00-003-9888
5120-00-003-9889     DRIFT PIN
5120-00-003-9892
5120-00-003-9893
5120-00-003-9895
5120-00-003-9896     ALIGNMENT TOOL,PLUNGER
5120-00-003-9897     ALIGNMENT TOOL,PIN
5120-00-003-9898     INSERTER,BEARING AND BUSHING
5120-00-003-9914
5120-00-004-1016     TANG,WRENCH ASSEMBLY
5120-00-004-1075
5120-00-004-1284
5120-00-004-1285
5120-00-004-1299     WRENCH,SPECIAL
5120-00-004-1303     INSTALLATION TOOL
5120-00-004-1304     CRIMPING TOOL,TERMINAL,HAND
5120-00-004-1307     INSERTER AND REMOVER,BEARING AND BUSHING
5120-00-004-1308     INSERTION TOOL
5120-00-004-1309
5120-00-004-1310     WRENCH,SPECIAL
5120-00-004-1312
5120-00-004-1314
5120-00-004-1319
5120-00-004-1911     WRENCH,BEARING CAN NUT
5120-00-004-2143     ADAPTER,PROPELLER SHAFT
5120-00-004-2922     CRIMPING TOOL,TERMINAL,HAND
5120-00-004-3967     EXPANDER
5120-00-004-3968     WRENCH,OIL SCREEN
5120-00-004-3971     PULLER
5120-00-004-3972     PULLER
5120-00-004-3973     EXPANDER
5120-00-004-3974     ADAPTER
5120-00-004-3975     EXPANDER
5120-00-004-3976     EXPANDER
5120-00-004-3977     SUPPORT
5120-00-004-3978     SPLINE
5120-00-004-3979     WRENCH
5120-00-004-3980     ATTACHMENT
5120-00-004-3981     WRENCH
5120-00-004-3983     WRENCH
5120-00-004-3984     PULLER,TEE HANDLE
5120-00-004-3995     REPLACER,INNER CUP
5120-00-004-4112
5120-00-004-4915     LOCATOR ADAPTER
5120-00-004-4916
5120-00-004-4917     ADAPTER,PLUG
5120-00-004-4918
5120-00-004-4919     PLATE BEARING
5120-00-004-4920     PLATE,ARM-STOP BEAR
5120-00-004-4921     DRIFT
5120-00-004-4922     DRIFT
5120-00-004-5608     SWAGING TOOL,SCREEN RETAINER
5120-00-004-5622
5120-00-004-5628
5120-00-004-5629     ADAPTER TOOL,GEAR TRAIN
5120-00-004-5630     ADAPTER PLATE,GEAR TRAIN
5120-00-004-5631     DISASSEMBLY TOOL,SEAL TRANSFER GEARBOX
5120-00-004-5632     ARM,DISASSEMBLY TOOL
5120-00-004-5633     DISASSEMBLY TOOL,CARBON SEAL
5120-00-004-5634     ARM,DISASSEMBLY TOOL
5120-00-004-5635     WRENCH,SPANNER
5120-00-004-5636     DISASSEMBLY TOOL,BEARING HOUSING
5120-00-004-5637     DISASSEMBLY TOOL,GEARBOX BEARING
5120-00-004-5638     INSTALLATION AND REMOVAL TOOL
5120-00-004-5639     ROD,PULLER
5120-00-004-5640     FOOT,PULLER,BEARING
5120-00-004-5641     DISASSEMBLY TOOL,BU
5120-00-004-5642     DISASSEMBLY TOOL,BUSHING REPAIR
5120-00-004-5643
5120-00-004-5644     TOOL SET,STATOR VANE REPAIR
5120-00-004-5645     HOLDING TOOL,STATOR VANE
5120-00-004-5646
5120-00-004-5647     FORMING TOOL,HOT BENDING
5120-00-004-7497     FOOT,PULLER,BEARING
5120-00-004-7505
5120-00-004-7506     DISASSEMBLY TOOL,SEAL
5120-00-004-7507     STAKING TOOL,ROLLER
5120-00-004-7508     INSERTER,BEARING AND BUSHING
5120-00-004-7509     INSERTER,BEARING AND BUSHING
5120-00-004-7510     INSERTER,BEARING AND BUSHING
5120-00-004-7512
5120-00-004-7513
5120-00-004-7514
5120-00-004-7793     INSERT TOOL,SEAL
5120-00-004-7794     INSERT TOOL,SEAL
5120-00-004-8428
5120-00-004-9104     CROSS,TUBE
5120-00-004-9921     RETAINER ASSEMBLY,SWAGE
5120-00-004-9922     RETAINER,SWAGING TO
5120-00-004-9923     RETAINER,SWAGING TO
5120-00-004-9924     END STOP,SWAGING TO
5120-00-004-9926     RETAINER,SWAGING TO
5120-00-004-9968     REMOVAL TOOL,CONTAC
5120-00-004-9972     CRIMPING TOOL,DIE
5120-00-004-9976     DIE SET,CRIMPING TO
5120-00-004-9977     LOCATOR,CRIMPING TO
5120-00-004-9978     LOCATOR TOOL,CONTACT
5120-00-004-9979     CRIMPING TOOL,TERMINAL,HAND
5120-00-004-9980     DIE,CRIMPING TOOL
5120-00-004-9981     WRENCH,TORQUE
5120-00-004-9982
5120-00-004-9983
5120-00-004-9985     INSERTION TOOL,CONTACT
5120-00-004-9986     LOCATOR TOOL,CONTACT
5120-00-004-9987     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-004-9990     LOCATOR,SWAGING TOOL,TUBE FITTING
5120-00-004-9991
5120-00-004-9992     LOCATOR,SWAGING TOOL,TUBE FITTING
5120-00-004-9993
5120-00-004-9994
5120-00-004-9995     STOP,LATCH,SWAGE
5120-00-004-9996     RETAINER,SWAGING TO
5120-00-004-9997     RETAINER ASSEMBLY,SWAGE
5120-00-005-0000     REMOVAL TOOL,PISTON
5120-00-005-1024     NOSE ASSEMBLY,FASTENER REMOVAL TOOL
5120-00-005-1025     NOSE ASSEMBLY,FASTENER REMOVAL TOOL
5120-00-005-1076
5120-00-005-1077
5120-00-005-1078
5120-00-005-1079     WRENCH,SPANNER
5120-00-005-1097     ADJUSTING TOOL,BRAKE
5120-00-005-1356     WRENCH,SPANNER
5120-00-005-1357     ADAPTER,WRENCH,RETAINING NUT
5120-00-005-2219     PULLER,MECHANICAL
5120-00-005-2220
5120-00-005-2221
5120-00-005-2222     PULLER,SLEEVE
5120-00-005-2223
5120-00-005-2224
5120-00-005-2237     BUSHING TOOL,DRILL
5120-00-005-2245     WRENCH,COMPRESSOR BLADE
5120-00-005-2246     DRIVER TOOL,CARBON SEAL
5120-00-005-2247     REMOVAL TOOL,CARBON SEALS
5120-00-005-2248     CLAMP SHAFT,SPRING PUSHER
5120-00-005-2249     CLAMP SHAFT,SPRING PUSHER
5120-00-005-2250     PUNCH,PRESSING TOOL
5120-00-005-2251     ADAPTER,POWER ARM TOOL
5120-00-005-2252     ROLL,FORMING TOOL
5120-00-005-2253     ROLL,FORMING TOOL
5120-00-005-2254     ROLL,FORMING TOOL
5120-00-005-2255     ROLL,FORMING TOOL
5120-00-005-2260
5120-00-005-2261     LOCATING TOOL,COMBUSTOR DOME
5120-00-005-2262     BASE,COMBUSTOR DOME
5120-00-005-2263     RING,COMBUSTION CHAMBER
5120-00-005-2264     CAP,COMBUSTION CHAMBER
5120-00-005-2266
5120-00-005-2267
5120-00-005-2268
5120-00-005-2269     PUSHING TOOL,INSERTER
5120-00-005-2325     WRENCH,RATCHET
5120-00-005-2361     DISASSEMBLY TOOL,LOCK SPLINED BEARING
5120-00-005-2362     DISASSEMBLY TOOL,BEARING
5120-00-005-2363     INSTALLATION TOOL,FAN SHAFT DEFLECTOR
5120-00-005-2364     ADAPTER,TORQUE WRENCH
5120-00-005-2365     ADAPTER,TORQUE WRENCH
5120-00-005-2366     ADAPTER,TORQUE WRENCH
5120-00-005-2367     ADAPTER,TORQUE WRENCH
5120-00-005-2368     ADAPTER,TORQUE WRENCH
5120-00-005-2369     ADAPTER,TORQUE WRENCH
5120-00-005-2370     ADAPTER,TORQUE WRENCH
5120-00-005-2371     ADJUSTING TOOL,TURBINE ROTOR
5120-00-005-2372     ADJUSTING TOOL,TURBINE ROTOR
5120-00-005-2373     ADJUSTING TOOL,TURBINE ROTOR
5120-00-005-2376
5120-00-005-2379
5120-00-005-2380
5120-00-005-2381
5120-00-005-2382
5120-00-005-2383
5120-00-005-2386
5120-00-005-2387     ALIGNMENT TOOL,IMPELLER
5120-00-005-3326     KIT,REPAIR PARTS,JA
5120-00-005-3327     KIT,REPAIR PARTS,JA
5120-00-005-3623     RING
5120-00-005-3624     PUSHER
5120-00-005-3630     PUSHER
5120-00-005-3631     PUSHER
5120-00-005-3632     RING
5120-00-005-3633     PUSHER
5120-00-005-3634     PLATE
5120-00-005-3635     RING
5120-00-005-3636     RING
5120-00-005-3637
5120-00-005-3638     TUBE
5120-00-005-3639     RING
5120-00-005-3640
5120-00-005-3641     PUSHER
5120-00-005-3642     PUSHER
5120-00-005-3643     RING
5120-00-005-3644     PUSHER
5120-00-005-3645
5120-00-005-3646     TOOL,IMPACT
5120-00-005-3647
5120-00-005-3648     PUSHER
5120-00-005-3649     PUSHER
5120-00-005-3650     STOP
5120-00-005-3651     PUSHER
5120-00-005-3652     STOP
5120-00-005-3653     PUSHER
5120-00-005-3654     PUSHER
5120-00-005-3655     PUSHER
5120-00-005-3656
5120-00-005-3657     PUSHER
5120-00-005-3658     PUSHER
5120-00-005-3659     PUSHER
5120-00-005-3660
5120-00-005-3662     PUSHER
5120-00-005-3663     PUSHER
5120-00-005-3664     PUSHER
5120-00-005-3665     PUSHER
5120-00-005-3666     PUSHER
5120-00-005-3667     PUSHER
5120-00-005-3668     WRENCH,SPANNER,SPEC
5120-00-005-3848     EXTRACTOR,LAMP
5120-00-005-4788     WRAPPING TOOL,MOTOR
5120-00-005-4789
5120-00-005-4790
5120-00-005-4791     WRAPPING TOOL,HAND
5120-00-005-4792
5120-00-005-4793     WRAPPING TOOL
5120-00-005-4794     WRAPPING TOOL
5120-00-005-4795
5120-00-005-5471     ALIGNMENT TOOL,ELECTRONIC EQUIPMENT
5120-00-005-5613     BODY,SWAGE TOOL
5120-00-005-5614     HOLDER,SWAGE TOOL
5120-00-005-5615     RETAINER,SWAGE TOOL
5120-00-005-5616
5120-00-005-5617     BODY SWAGE TOOL
5120-00-005-5619     LOCATOR,SWAGING TOOL,TUBE FITTING
5120-00-005-5639     PISTON ASSEMBLY,SWAGE
5120-00-005-5640     COVER,END,SWAGE
5120-00-005-5641     PLATE,SWAGE TOOL
5120-00-005-5642
5120-00-005-5643     HOLDER,SWAGE TOOL
5120-00-005-5644
5120-00-005-5645     LOCATOR,SWAGING TOOL,TUBE FITTING
5120-00-005-5646     GAGE PLATE,SWAGE
5120-00-005-5647     LOCATOR,SWAGE TOOL
5120-00-005-5649     BUTTON,SWAGE TOOL
5120-00-005-5651     PISTON ASSEMBLY,SWAGE
5120-00-005-5652     COVER END,SWAGE
5120-00-005-5653     LOCKING LATCH SWAGE
5120-00-005-5654     HANDLE,LOCKING LATCH
5120-00-005-7149     JACK,HYDRAULIC,HAND
5120-00-005-7271     PUSHER
5120-00-005-7272     PUSHER
5120-00-005-8054     INSERTER,ELECTRICAL CONTACT
5120-00-005-8055     LOCATOR,SWAGE TOOL
5120-00-005-8678     INSTALLATION TOOL,ORIFICE
5120-00-005-8679     INSERTER AND REMOVER,SEAL
5120-00-005-8680
5120-00-005-8681
5120-00-005-8682     PULLER,SLEEVE
5120-00-005-8683     PULLER,SLEEVE
5120-00-005-8684     INSTALLATION TOOL,RETAINING RING
5120-00-005-8714
5120-00-005-8750     IMPACT TOOL,PYLON REMOVAL
5120-00-005-9080     PLATE
5120-00-005-9081
5120-00-005-9082
5120-00-005-9083     WRENCH,SPANNER,SPEC
5120-00-005-9085     RING
5120-00-005-9086     PUSHER
5120-00-005-9087     RING
5120-00-005-9088     PUSHER
5120-00-005-9089
5120-00-005-9093     PUSHER
5120-00-005-9094     PUSHER
5120-00-005-9095
5120-00-005-9096     PLATE
5120-00-005-9097     ADAPTER,POWERARM
5120-00-005-9098     PUSHER
5120-00-005-9099     WRENCH,SPANNER,SPEC
5120-00-005-9102     PUSHER
5120-00-005-9104     PUSHER
5120-00-006-0490     LOCATOR,SWAGING TOOL,TUBE FITTING
5120-00-006-1470
5120-00-006-1471     PUSHER
5120-00-006-1472     PUSHER
5120-00-006-1473     RING
5120-00-006-2866     ALIGNMENT TOOL,SHROUD SLIPPER
5120-00-006-2867
5120-00-006-2868
5120-00-006-2869     PULLER,MECHANICAL
5120-00-006-2870     DRIFT,FUEL CONTROL BEARING
5120-00-006-2871     DRIFT,FUEL PUMP DRIVE
5120-00-006-2872
5120-00-006-2873
5120-00-006-2874
5120-00-006-2875     DRIFT
5120-00-006-2876     INSERTER AND REMOVER,BEARING AND BUSHING
5120-00-006-2877
5120-00-006-2878     EXPANDER TOOL,SLEEVE
5120-00-006-2879
5120-00-006-2880     CLAMP,TOGGLE
5120-00-006-3147     SOCKET,SOCKET WRENCH
5120-00-006-3148     HAMMER,HAND
5120-00-006-3149     HAMMER,HAND
5120-00-006-3150     PACKER,BEARING
5120-00-006-3350
5120-00-006-3406
5120-00-006-3644
5120-00-006-3814     WRENCH,RATCHET
5120-00-006-3815     SHAFT ASSY
5120-00-006-3818     RING,TIRE REMOVAL
5120-00-006-4526
5120-00-006-4536     REMOVER,ELECTRICAL CONTACT
5120-00-006-4547     END STOP,SWAGING TO
5120-00-006-5780     HOLDER,INSERTED HAMMER FACE
5120-00-006-5860     PUSHER
5120-00-006-5861     PUSHER
5120-00-006-5862     RING
5120-00-006-5863     PUSHER
5120-00-006-5864     ADAPTER
5120-00-006-5865     JACKSCREW
5120-00-006-5866     PUSHER
5120-00-006-5867
5120-00-006-5868
5120-00-006-5870
5120-00-006-5871     RING
5120-00-006-5872     PUSHER
5120-00-006-5873     PUSHER
5120-00-006-5874
5120-00-006-5875     PUSHER
5120-00-006-5876
5120-00-006-5877     ADAPTER
5120-00-006-5878     JACKSCREW
5120-00-006-5879     PUSHER
5120-00-006-5880     RING
5120-00-006-5881     PUSHER
5120-00-006-5882     RING
5120-00-006-5883     PUSHER
5120-00-006-5884     PUSHER
5120-00-006-5886     MASTER
5120-00-006-5887     PIN,GUIDE
5120-00-006-5888
5120-00-006-5889     ADAPTER
5120-00-006-5890     PUSHER
5120-00-006-5891     STOP
5120-00-006-5892     PUSHER
5120-00-006-5893     STOP
5120-00-006-6402
5120-00-006-7398     PULLER
5120-00-006-7400     PULLER
5120-00-006-7401     RING
5120-00-006-7402     PUSHER
5120-00-006-7403     RING
5120-00-006-7404     PUSHER
5120-00-006-7406
5120-00-006-7407     ADAPTER
5120-00-006-7408     PUSHER
5120-00-006-7409     PUSHER
5120-00-006-7410     PUSHER
5120-00-006-7411     PUSHER
5120-00-006-8884     INSERTER,BEARING AND BUSHING
5120-00-006-8887
5120-00-006-8903
5120-00-006-8913     ALIGNMENT TOOL
5120-00-006-8918     TOOL,FLANGE STRAIGHTENING
5120-00-006-8925     WRENCH,FLEXIBLE DRIVE
5120-00-006-8927     APPLICATOR TOOL
5120-00-006-8928     PULLER,CARD
5120-00-006-8929     DRIVER TOOL,NUT
5120-00-006-8990     ADAPTER TOOL,PISTON PIN
5120-00-006-8991     ADAPTER TOOL,PISTON
5120-00-006-8993     INSERTER,PISTON
5120-00-006-9202     ADJUSTING TOOL,VALVE TAPPET
5120-00-006-9203     WRENCH,SOCKET
5120-00-006-9204     PLIERS
NSNNameStatus
5120-00-006-9205     HOOK,CANT
5120-00-006-9206     ADAPTER,TORQUE WRENCH
5120-00-006-9212     WRENCH,TORQUE
5120-00-006-9213     WRENCH,TORQUE
5120-00-006-9214     WRENCH,TORQUE
5120-00-006-9215     WRENCH,TORQUE
5120-00-006-9216     WRENCH,TORQUE
5120-00-006-9217     ADAPTER,TORQUE WRENCH
5120-00-006-9218     ADAPTER,TORQUE WRENCH
5120-00-006-9410     RING
5120-00-006-9411
5120-00-006-9413
5120-00-006-9414     PLATE
5120-00-006-9415     PUSHER
5120-00-006-9416     PUSHER
5120-00-006-9417     PUSHER
5120-00-006-9418     RING
5120-00-006-9419     RING
5120-00-006-9420     RING
5120-00-006-9421     PUSHER
5120-00-006-9422     RING
5120-00-006-9423     RING
5120-00-006-9424
5120-00-006-9425
5120-00-006-9426     PUSHER
5120-00-006-9427     PIN,GUIDE
5120-00-006-9435     CLAMP,C
5120-00-006-9436
5120-00-006-9476     ALIGNMENT TOOL,ELECTRONIC EQUIPMENT
5120-00-006-9477
5120-00-006-9478
5120-00-006-9479
5120-00-006-9480
5120-00-006-9481
5120-00-006-9496
5120-00-006-9499
5120-00-006-9503     ADAPTER,TORQUE WRENCH
5120-00-006-9507
5120-00-006-9528     GUN,ENGINE CLEANING
5120-00-006-9954
5120-00-006-9956     DRIFT
5120-00-006-9961     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-006-9964     ADAPTER,TORQUE WRENCH
5120-00-006-9965     ADAPTER,TORQUE WRENCH
5120-00-006-9966     REMOVER,ELECTRICAL CONTACT
5120-00-006-9967     CRIMPING TOOL,TERMINAL,HAND
5120-00-006-9983     SOCKET,WRENCH,FACE SPANNER
5120-00-006-9990     CRIMPING TOOL,SPECI
5120-00-006-9991     REMOVER,ELECTRICAL CONTACT
5120-00-007-1090     RING
5120-00-007-1091     PUSHER
5120-00-007-1092     RING
5120-00-007-1093     PUSHER
5120-00-007-1094     PULLER
5120-00-007-1095     PUSHER
5120-00-007-1481
5120-00-007-1500
5120-00-007-2170     WRENCH ADJUSTING HYDRANT SEAT VALVE
5120-00-007-2580
5120-00-007-2663     ASSEMBLY TOOL,VALVE
5120-00-007-3723     INSERTER,SEAL
5120-00-007-3764     LOCATING TOOL,PIN
5120-00-007-5426
5120-00-007-5746
5120-00-007-5752     INSERTER,ELECTRICAL CONTACT
5120-00-007-7017     FLARING TOOL,TUBE,HAND
5120-00-007-7098     WRENCH,RATCHET
5120-00-007-7099     PULLER AND LIFT,TU
5120-00-007-7100     INSTALLATION TOOL,DAMPER SLEEVE
5120-00-007-7968
5120-00-007-8172
5120-00-007-8341     INSERTER,ELECTRICAL CONTACT
5120-00-007-8342     REMOVER,ELECTRICAL CONTACT
5120-00-007-9022     KEY,SOCKET HEAD SCREW
5120-00-007-9023
5120-00-008-0263     SOCKET,SOCKET WRENCH
5120-00-008-0702     CRIMPING TOOL,TERMINAL,HAND
5120-00-008-0703     REMOVER,ELECTRICAL CONTACT
5120-00-008-0704
5120-00-008-0705     CRIMPING TOOL,TERMINAL,HAND
5120-00-008-0706     REMOVER,ELECTRICAL CONTACT
5120-00-008-1452     RATCHET LEVER,REVER
5120-00-008-1833
5120-00-008-3738     LIFTER,ROAD WHEEL
5120-00-008-4150     RETAINING TOOL,CARRIER ASSEMBLY
5120-00-008-4151     REMOVER,SEAL
5120-00-008-4152     SEAL BROACHING KIT *
5120-00-008-4495     INSERTER,ELECTRICAL CONTACT
5120-00-008-5111     ADJUSTMENT TOOL,LATCH
5120-00-008-5576
5120-00-008-5577     WRENCH,SPANNER
5120-00-008-5578     INSTALLATION TOOL
5120-00-008-5589     STAKING TOOL
5120-00-008-5591     CROWFOOT ATTACHMENT,SOCKET WRENCH
5120-00-008-5592     COMPRESSOR,SEAL
5120-00-008-5593     EXPANDER,PISTON SEAL
5120-00-008-5594     COMPRESSOR,SEAL
5120-00-008-5595     EXPANDER,PISTON SEAL
5120-00-008-5596     KEY,SOCKET HEAD SCREW
5120-00-008-5601     REMOVER,SEAL
5120-00-008-5607     WRENCH,SPECIAL
5120-00-008-5608     ADAPTER,TORQUE WRENCH
5120-00-008-5609     CROWFOOT ATTACHMENT,SOCKET WRENCH
5120-00-008-5638     GUIDE,BOLT
5120-00-008-5654     INSERTION TOOL
5120-00-008-5655     WRENCH,SPANNER
5120-00-008-5656     INSTALLING TOOL,PIN
5120-00-008-5675     COMPRESSOR,SEAL
5120-00-008-5676     COMPRESSOR,SEAL
5120-00-008-5677     EXPANDER,PISTON SEAL
5120-00-008-5684     ALIGNMENT TOOL,BEAR
5120-00-008-6722     PULLER,SEAL,GEARBOX
5120-00-008-7091     WRENCH ASSEMBLY
5120-00-008-8237     INSERTER AND REMOVER,SEAL
5120-00-008-9582     PULLER,MECHANICAL
5120-00-009-0297
5120-00-009-0455
5120-00-009-1422     WRENCH,ADJUSTABLE
5120-00-009-2855     DIE,HOLDING FIXTURE
5120-00-009-2856     DIE,HOLDING FIXTURE
5120-00-009-2857     COLLAR,HOLDING FIXTURE
5120-00-009-2858     EXPANDER TOOL,TUBE
5120-00-009-2859     SET RING,HOLDING FIXTURE
5120-00-009-3740     FEATHEREDGE,PLASTERER'S
5120-00-009-3742
5120-00-009-3743     TROWEL
5120-00-009-3744     PADDLE,ANGLE,PLASTERERS
5120-00-009-3745     SCARIFIER,PLASTERER'S
5120-00-009-4395     INSERTER,SEAL
5120-00-009-4425     BODY,SEALANT INJECTOR
5120-00-009-4426
5120-00-009-4427
5120-00-009-4428
5120-00-009-4429     PULLER,VENT AIR SEAL
5120-00-009-5044     BAR,RESCUE TOOL
5120-00-009-5343
5120-00-009-5575
5120-00-009-6198     EXTRACTOR,LAMP
5120-00-009-7220     RING,TIRE REMOVAL
5120-00-009-7940
5120-00-009-7941     REMOVAL TOOL,ACTUATOR
5120-00-009-7942
5120-00-009-7945
5120-00-009-7946     INSTALLATION TOOL,RETAINING RING
5120-00-009-7949     ADAPTER SET,TORQUE WRENCH
5120-00-009-8272
5120-00-009-8602     SOCKET,SOCKET WRENCH
5120-00-009-9718     INSERTER,BEARING AND BUSHING
5120-00-009-9719     INSERTER,BEARING AND BUSHING
5120-00-009-9720     INSERTER,BEARING AND BUSHING
5120-00-009-9835
5120-00-009-9836     PULLER,TUBE
5120-00-009-9837
5120-00-009-9849     PRESS TOOL,POD
5120-00-009-9850     REMOVAL TOOL,BEARING
5120-00-009-9889     LIFTER,VACUUM CUP
5120-00-010-1274     TOOL,PULL TEST INSE
5120-00-010-1276     TOOL
5120-00-010-1277
5120-00-010-4636     INSERTER,SEAL
5120-00-010-4637     PULLER,SUPPORT ROD
5120-00-010-5013
5120-00-010-5072     ADAPTER
5120-00-010-5076
5120-00-010-5082     DIE,CRIMPING TOOL
5120-00-010-5185     CLAMP
5120-00-010-5186     PLIERS
5120-00-010-5188     WRENCH ASSEMBLY
5120-00-010-5189     ADAPTER
5120-00-010-5190     ADAPTER
5120-00-010-5211     TOOL
5120-00-010-5216
5120-00-010-5217     TOOL
5120-00-010-5218     PULLER
5120-00-010-5504
5120-00-010-5550
5120-00-010-5556     EXPANDER,SUPERCHARG
5120-00-010-5557
5120-00-010-6465     HANDLE
5120-00-010-6626     KEY,SOCKET HEAD SCREW
5120-00-010-6627     KEY,SOCKET HEAD SCREW
5120-00-010-6721
5120-00-010-6725     TOOL CRIMP
5120-00-010-6726
5120-00-010-6727     CONNECTOR,PLUG,ELECTRICAL
5120-00-010-6733     REMOVER,ELECTRICAL CONTACT
5120-00-010-6735
5120-00-010-6736     CRIMPING T00L
5120-00-010-7619     DISPENSER,SEALANT
5120-00-010-7891     SIZING TOOL
5120-00-010-7893
5120-00-010-7904     WRENCH,SOCKET
5120-00-010-7905     WRENCH,SOCKET
5120-00-010-7913     SCREWDRIVER,FLAT TIP
5120-00-010-7914     SCREWDRIVER,FLAT TIP
5120-00-010-7915     SCREWDRIVER,FLAT TIP
5120-00-010-7916     SCREWDRIVER,FLAT TIP
5120-00-010-7917     SCREWDRIVER,CROSS TIP
5120-00-010-7918
5120-00-010-7919     SCREWDRIVER,CROSS TIP
5120-00-010-7920     WRENCH,SOCKET
5120-00-010-9421     REMOVAL TOOL,FUEL VALVE
5120-00-010-9429     CROWFOOT ATTACHMENT,SOCKET WRENCH
5120-00-010-9694
5120-00-010-9696     SLEEVE,LOADING SLIP
5120-00-011-0042
5120-00-011-0043     WRENCH
5120-00-011-0370
5120-00-011-0378     ADAPTER,BEARING SEA
5120-00-011-0543     INSERTER AND REMOVER,BEARING AND BUSHING
5120-00-011-0641     ADAPTER,TORQUE WRENCH
5120-00-011-0711
5120-00-011-0900
5120-00-011-0901
5120-00-011-1543
5120-00-011-2083     WRENCH,SPANNER
5120-00-011-2084     REMOVING TOOL
5120-00-011-2088     INSERTING TOOL,ORIF
5120-00-011-2089     WRENCH,SPANNER
5120-00-011-2090     WRENCH,SPANNER
5120-00-011-2091     EXTRACTOR,SEAT
5120-00-011-2095
5120-00-011-2096     WRENCH,SEAT RETAINE
5120-00-011-2097     WRENCH,SOCKET
5120-00-011-2099     INSERTER AND REMOVER,PIN
5120-00-011-2102     INSTALLATION TOOL,K
5120-00-011-2103
5120-00-011-2117     ADJUSTING TOOL,SWIT
5120-00-011-2119
5120-00-011-2120     DRIVER,ORIFICE
5120-00-011-2122     INSERTER,BEARING AND BUSHING
5120-00-011-2123     INSERTER AND REMOVER,PIN
5120-00-011-2126     TOOL ASSEMBLY,GOVER
5120-00-011-2128
5120-00-011-2130
5120-00-011-2144
5120-00-011-2146     POSITIONING TOOL,SL
5120-00-011-2147     REMOVAL TOOL,LEADS
5120-00-011-2148     REMOVAL TOOL,FLAT
5120-00-011-2149     COMPRESSOR,DASHPOT,
5120-00-011-2367
5120-00-011-2369     ADAPTER,TORQUE WRENCH
5120-00-011-2370     INSERTER,SEAL
5120-00-011-2371     ADAPTER,MICROMETER
5120-00-011-2372     INSTALLING TOOL,VAL
5120-00-011-2374     WRENCH,SPANNER
5120-00-011-2377     PULLER,MECHANICAL
5120-00-011-2378     INSERTER AND REMOVER,BEARING AND BUSHING
5120-00-011-2379     INSERTER AND REMOVER,STUD
5120-00-011-2381     STRAIGHTENING TOOL
5120-00-011-2382     EXTRACTOR TOOL,PIN
5120-00-011-2383     ADAPTER,TORQUE,MAIN
5120-00-011-2384     PULLER ASSEMBLY,TRU
5120-00-011-2385     INSTALLATION TOOL,F
5120-00-011-5860     WRENCH,TORQUE
5120-00-011-9753
5120-00-012-1042
5120-00-012-2059
5120-00-012-2094
5120-00-012-2214
5120-00-012-2218
5120-00-012-2288
5120-00-012-2325
5120-00-012-3425     INSERTER AND REMOVER,ELECTRICAL CONTACT
5120-00-012-3427     TRUNION TOOL
5120-00-012-3645     SCREWDRIVER ATTACHMENT,SOCKET WRENCH
5120-00-012-4013     FORCEPS,NONSURGICAL
5120-00-012-4016     FORCEPS,NONSURGICAL
5120-00-012-4647     PULLER,MECHANICAL
5120-00-012-4648     PULLER,MECHANICAL
5120-00-012-4653
5120-00-012-4662     HOLDER,CYLINDER ROC
5120-00-012-4665
5120-00-012-4666
5120-00-012-4671
5120-00-012-4688
5120-00-012-5126
5120-00-012-5130     CRIMPING TOOL,TERMINAL,HAND
5120-00-012-5132
5120-00-012-5133     INSERTER,ELECTRICAL CONTACT
5120-00-012-5134
5120-00-012-5138
5120-00-012-5140     PLIERS
5120-00-012-5142     HOOK
5120-00-012-6179     ROLLER SPRING INSTA
5120-00-012-6181     FEEDER INSTALLATION
5120-00-012-8845
5120-00-012-8849
5120-00-012-8859
5120-00-012-8865     PULLER,MECHANICAL
5120-00-012-8893
5120-00-012-9109     PULLER,MECHANICAL
5120-00-012-9250
5120-00-012-9257
5120-00-012-9264
5120-00-013-2683
5120-00-013-2695     ALIGNMENT TOOL,GYRO
5120-00-013-2730     DRIFT PIN
5120-00-013-2738     PILOT
5120-00-013-2744
5120-00-013-2748     PLUG
5120-00-013-2771     WRENCH,BOX
5120-00-013-2800
5120-00-013-2815
5120-00-013-2820
5120-00-013-2829     BENDER,TUBE,HAND
5120-00-013-2854     PIN STRAIGHTENER
5120-00-013-2891     ROLLER SPRING HOLDI
5120-00-013-7117     ALIGNMENT TOOL,ELECTRONIC EQUIPMENT
5120-00-013-7561     PULLER,MECHANICAL
5120-00-013-7562     SCREWDRIVER ATTACHMENT,SOCKET WRENCH
5120-00-013-7566     SOCKET WRENCH ATTACHMENT,SCREWDR
5120-00-013-7621     SCREWDRIVER ATTACHMENT,SOCKET WRENCH
5120-00-013-7622     SCREWDRIVER ATTACHMENT,SOCKET WRENCH
5120-00-013-7623     SCREWDRIVER ATTACHMENT,SOCKET WRENCH
5120-00-013-7624     SCREWDRIVER ATTACHMENT,SOCKET WRENCH
5120-00-013-7992     PLIERS SET,RETAINING RING
5120-00-013-8923     WRENCH,SPANNER
5120-00-013-8924     WRENCH,SPANNER
5120-00-013-8925     WRENCH,SPANNER
5120-00-013-8926     WRENCH,RING EJECTOR
5120-00-013-8927     PULLER,MECHANICAL
5120-00-013-8929     PULLER,MECHANICAL
5120-00-013-8930     WRENCH,SPANNER
5120-00-013-8931     PULLER,MECHANICAL
5120-00-013-8932     WRENCH,PLUG
5120-00-013-8933     WRENCH,CROWN GEAR
5120-00-013-8934     PULLER,BEARING
5120-00-013-8935     WRENCH,LIFT ROD
5120-00-013-8936     PULLER,IDLER GEAR
5120-00-013-8937     PULLER,ACTUATORPIN
5120-00-013-8945     FIXTURE,BEARING AND
5120-00-013-8946     INSTALLING TOOL,CON
5120-00-013-8947     INSTALLING TOOL,SE
5120-00-013-8948     INSERTER AND REMOVER,BEARING AND BUSHING
5120-00-013-8949     INSTALLING TOOL,INS
5120-00-013-8950     FIXTURE TOOL,BOTTOM
5120-00-013-8951     FLARING TOOL,SERVO
5120-00-013-8952     INSTALLING TOOL,COL
5120-00-013-8953     CLAMP SET,O-RING
5120-00-013-8954     WRENCH,BEARING NUT
5120-00-013-8955     TOOL,INSTALL AND RE
5120-00-013-8956     PULLER,IMPACT
5120-00-014-0692
5120-00-014-1251     BRUSH,WIRE,FURNACE AND FLUE
5120-00-014-1257
5120-00-014-1258
5120-00-014-1259
5120-00-014-1521     ADAPTER,TORQUE WRENCH
5120-00-014-1522     ADAPTER,TORQUE WRENCH
5120-00-014-1615     WRENCH,SPANNER
5120-00-014-1626
5120-00-014-1627     WRENCH
5120-00-014-1628     SPANNER
5120-00-014-1629
5120-00-014-2010
5120-00-014-2894     TORQUE REACTOR ASSY
5120-00-014-2896     REMOVAL TOOL
5120-00-014-2902     INSERTER,SEAL
5120-00-014-2920
5120-00-014-5448
5120-00-014-5669
5120-00-014-5717     EXTENSION,SOCKET WRENCH
5120-00-014-6099     ADAPTER,TORQUE WRENCH
5120-00-014-6100     ADAPTER,TORQUE WRENCH
5120-00-014-6682
5120-00-014-6683
5120-00-015-0811     WRENCH,OPENEND
5120-00-015-1291     WRENCH,SOCKET
5120-00-015-1293     KEY,SOCKET HEAD SCREW
5120-00-015-1297     BLADE,SOCKET HEAD SCREW KEY
5120-00-015-1298     KEY,SOCKET HEAD SCREW
5120-00-015-1300     KEY,SOCKET HEAD SCREW
5120-00-015-1301     KEY,SOCKET HEAD SCREW
5120-00-015-1302     KEY,SOCKET HEAD SCREW
5120-00-015-1303     BLADE,SOCKET HEAD SCREW KEY
5120-00-015-1304
5120-00-015-1305     BLADE,SOCKET HEAD SCREW KEY
5120-00-015-1306
5120-00-015-1307     KEY,SOCKET HEAD SCREW
5120-00-015-1308     KEY,SOCKET HEAD SCREW
5120-00-015-1309
5120-00-015-1313     BLADE,SOCKET HEAD SCREW KEY
5120-00-015-1347     PULLER
5120-00-015-1525
5120-00-015-1531     PULLER
5120-00-015-1741     ANVIL,BLACKSMITH'S
5120-00-015-1768     ADAPTER,TORQUE WRENCH
5120-00-015-4451
5120-00-015-4462     JACK INJECTOR LINKA
5120-00-015-6693     ADAPTER,SOCKET WRENCH
5120-00-015-6945     WRENCH,TORQUEMETER
5120-00-015-6952
5120-00-015-6957     WRENCH,LOCKNUT ACCE
5120-00-015-6958     KEY,SOCKET HEAD SCREW
5120-00-015-7049
5120-00-015-7050
5120-00-015-7051
5120-00-015-7487     SCREWDRIVER
5120-00-015-7488
5120-00-015-7489     TWEEZERS
5120-00-015-8112     LOCKING TOOL
5120-00-015-8289
5120-00-015-8303     TOOL
5120-00-015-8321
5120-00-015-8322
5120-00-015-8323
5120-00-016-1716
5120-00-016-1717
5120-00-016-3093     WRENCH,SPANNER
5120-00-016-3627     PULLER,MECHANICAL
5120-00-016-3807     TOOL,BUSBAR
5120-00-016-3808     TOOL,BUSBAR
5120-00-016-3809     TOOL,BUSBAR
5120-00-016-3811
5120-00-016-3812     WRENCH,PILOTTED KEY
5120-00-016-3814     WRENCH,PILOTTED KEY
5120-00-016-3902     WRENCH,MECHANICAL
5120-00-016-4139     ALIGNMENT TOOL,ELECTRONIC EQUIPMENT
5120-00-016-4347     ALIGNMENT TOOL,ELECTRONIC EQUIPMENT
5120-00-016-4360     ALIGNMENT TOOL,ELECTRONIC EQUIPMENT
5120-00-016-4747
5120-00-016-4750
5120-00-016-4751
5120-00-016-6382     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-016-6554     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-016-7582     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-016-7647     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-016-7651
5120-00-016-7654     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-016-7657     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-0043     SOCKET,WRENCH,FACE SPANNER
5120-00-017-2843     TOOL
5120-00-017-2844
5120-00-017-2849     RIVETER,BLIND,HAND
5120-00-017-3640     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-3742     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-3809     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-3827     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-3921     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-3927     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-3932     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-3934     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-3935     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-4017     CRIMPING TOOL,TERMINAL,HAND
5120-00-017-4142     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-4196
5120-00-017-4199
5120-00-017-4200
5120-00-017-4708     GRIP,CABLE,WOVEN
5120-00-017-4953     TOOL,ALIGNMENT
5120-00-017-6081
5120-00-017-6166     KEY SET,SOCKET HEAD SCREW
5120-00-017-6172     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-6419     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-6919
5120-00-017-6920
5120-00-017-6921     HANDLE,SOCKET WRENCH
5120-00-017-6925     EXTRACTING TOOL
5120-00-017-6926
5120-00-017-6927
5120-00-017-6928
5120-00-017-6929
5120-00-017-6930
5120-00-017-6931
5120-00-017-7245     TURRET HEAD,CRIMPING TOOL
5120-00-017-7292     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-7324
5120-00-017-7325     WRENCH,TORQUE
5120-00-017-7327
5120-00-017-7328     SLEEVE
5120-00-017-7329     BEARING,PUSHER
5120-00-017-7330
5120-00-017-7331     ADAPTER,TORQUE WRENCH
5120-00-017-8009     CONTACT POSITIONER,TERMINAL CRIMPING TOOL
5120-00-017-8077     TOOL,ALIGNMENT,SPEC
5120-00-017-8078     TOOL,ALIGNMENT,SPEC
5120-00-017-8079     TOOL,ALIGNMENT,SPEC
5120-00-017-8080     TOOL,ALIGNMENT,SPEC
5120-00-017-8081     TOOL,ALIGNMENT,SPEC
5120-00-017-8082     TOOL,ALIGNMENT,SPEC
5120-00-017-8083     TOOLS ALIGNMENT SET
5120-00-017-8084     TOOL,ALIGNMENT,SPEC
5120-00-017-8085     TOOL,ALIGNMENT,SPEC
5120-00-017-8086     TOOL,ALIGNMENT,SPEC
5120-00-017-8087     TOOL,ALIGNMENT,SPEC
5120-00-017-8231
5120-00-017-8249
5120-00-017-8254
5120-00-017-8255     ADAPTER
5120-00-017-8256
5120-00-017-8307     BAR,ADAPTER SET
5120-00-017-8747     WRENCH,SPANNER
5120-00-017-8874
5120-00-017-8941
5120-00-017-9165     WRENCH,DOWNLOCK,MAIN LANDING GEAR
5120-00-017-9166     WRENCH,OPEN END
5120-00-017-9204     WRENCH,OPEN END
5120-00-017-9207     CARD PULLER
5120-00-017-9423
5120-00-017-9991     WRENCH,ADAPTER

Supply Items Included in Federal Supply Class 5120

ANVIL,BLACKSMITH'S

A tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

VISE,SQUARE END SAWING,TUBE

A device consisting of a base and one screw actuated jaw for holding thin wall brass and copper tubing while sawing. Includes a saw guide. Designed with holes for bolt or screw mounting on a bench, table, or the like.

VISE,CIRCULAR SAW FILING

A clamping device consisting of a base and two jaws, either with a sliding attachment on a support rod extending downward from the base, or with a sliding attachment within the jaws for supporting various sizes of circular saws. Designed to be clamped or bolted to a bench, table or the like.

VISE,PIPE

A clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

PUNCH,CENTER,AUTOMATIC

A spring actuated center punch, which when pressed against an object forms an indentation mark without the use of a hammer. The force is adjustable by regulating the stroke.

VISE,HANDSAW FILING

A clamping device consisting of a base, one stationary jaw and one jaw actuated by either a cam, an eccentric lever, or a screw lever, and designed to be clamp-mounted or bolted to a bench, table or the like. It may include a filing guide. Excludes VISE, BANDSAW FILING.

VISE,HAND

A clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

PUNCH AND DIE,GROMMET INSERTING

A two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

JACK,HYDRAULIC,HAND

A device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

ADAPTER,SOCKET WRENCH

A rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

SCREWDRIVER,FLAT TIP

A manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB&#59; SCREWDRIVER, RATCHET&#59; and SCREWDRIVER, SPARK TESTING.

SCRIBER,MACHINIST'S

A sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

MANDREL,BLACKSMITH'S

FULLER,BOTTOM,BLACKSMITH'S

SWAGE,BOTTOM,BLACKSMITH'S

WINDER,MAINSPRING,JEWELER'S

An item consisting of a single hand type or vise type winder, designed to wind a range of spring sizes, either by being adjustable or having additional barrels and/or arbors. For items consisting of two or more winders, each designed to wind an individual spring size, or two or more winders, each designed to wind a range of spring sizes, use WINDER SET, MAINSPRING, JEWELER'S.

BLOWTORCH,ALCOHOL

An item consisting of an air reservoir, fuel reservoir, wick holder, nozzel and pumping features. It is designed to pressurize and intensify alcohol combustion by means of an air blast.

FLARING TOOL,TUBE,HAND

A noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

POISING TOOL,JEWELER'S

SAW SET,HAND

A hand tool, designed for setting the cutting position of saw teeth to form a kerf wider than the thickness of the saw blade. In operation, it is held in the hand to set the saw teeth. See also SAW SETTING MACHINE.

PUNCH,BLACKSMITH'S

A hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

FIRE POT,LIQUID FUEL

A heating unit, with a bail like handle for hand carrying, provided with burners for liquid fuel to generate heat to melt solder, wax, and the like in a pot which fits into or is a part of the top assembly. An integral pressure pump is used to compress the air in the unit to furnish the fuel to the burners under pressure. It may have provisions for heating soldering irons.

WRENCH,DRAIN PLUG

A wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

BLOWER,WATCHMAKER'S

A hand tool consisting of a tubular or bulblike body and a stem or nozzle. It is made of metal or rubber, for use in blowing dust from watch parts, instrument parts, and the like.

CLAMP,SCREW,QUICK ADJUSTING

A clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

PALM,SEWING

A metallic disk attached to a strap and worn on the palm of the hand. It is used to push the needle through the canvas in sewing sails and like items.

SCREWDRIVER,RATCHET

A manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

WRENCH,SPANNER

A tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

FLATTER,BLACKSMITH'S

FULLER,TOP,BLACKSMITH'S

SWAGE,TOP,BLACKSMITH'S

WRENCH,PIPE

A wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

HANDLE,SOCKET WRENCH

An item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

EXTRACTOR,SCREW

A hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

EXTRACTOR,TAP

Excludes EXTRACTOR, SCREW.

SCREWDRIVER,OFFSET

BIT,SCREWDRIVER

An item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

FINGER,MECHANICAL

A hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

SOCKET,SOCKET WRENCH

An item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

KEY,SOCKET HEAD SCREW

A hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

WRENCH,SOCKET

A wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

GRIP,CABLE,JAW

A device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

GROOVER,SHEET METAL,HAND

LACER,BELT,PORTABLE

SOCKET,WRENCH,FACE SPANNER

An item designed to be driven by an external or internal drive. It has a face type spanner end.

JACK,PUSH-PULL,SCREW

BENDER,TUBE,HAND

A hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

WRENCH,BOX

A nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX&#59; and WRENCH, BOX AND OPEN END, COMBINATION.

CLAMP,C

A clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

CREASER,LEATHER,HAND

SEAMER,SHEET METAL,HAND

LADLE,MELTING,HAND

IGNITER,FRICTION

An item having a file and flint at one end which when rubbed together produce a spark.

PUNCH,EYELET,PLIER TYPE

A device which punches or pierces a hole and in addition fastens or sets a metal eyelet in cloth, paper and similar material. It is similar to a plier in general form. See also PRESS, GROMMET AND EYELET, HAND OPERATED.

BAR,GREASE

BAR,LINING

BAR,PINCH

A hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

BAR,PRY

Before using, refer to Reference Drawing Group AG.

BAR,WRECKING

Before using, refer to Reference Drawing Group AG.

CROWBAR

Before using, refer to Reference Drawing Group AG.

PUNCH,DRIVE PIN

INC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

CAULKING IRON,WOOD

Refer to Reference Drawing Group A before using item name. See also CAULKING TOOL, HAND&#59; HAWSING IRON and YARNING IRON.

YARNING IRON

Refer to Reference Drawing Group AH before using item name. See also CAULKING TOOL, HAND&#59; CAULKING IRON, WOOD and HAWSING IRON.

MALLET,CAULKING

MALLET,HAWSING

MALLET,SERVING

PLIERS

Refer to Reference Drawing Group A. See also PLIERS (as modified).

BRUSH SECTION SET,WIRE,BOILER TUBE

An item consisting of a complete set of brush sections (cartridges), with spring(s), pin(s), retainer(s) as required for replacement in a BRUSH, WIRE, BOILER TUBE.

SPATULA

A knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

STRAINER,PAINT

DRIFTPIN

A round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

CAULKING TOOL,HAND

Refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD&#59; HAWSING IRON and YARNING IRON.

FACE,HAMMER,INSERTED

HOLDER,SHEET METAL,EDGE GRIP

A U-shaped, center lever grip clamping device or a forceps operated, spring loaded clamping device designed to grip edges of two or more sheet metal parts in order to position, align, and/or hold the parts together.

HOLDER,SHEET METAL,HOLE

A device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

BRUSH,WIRE,FURNACE AND FLUE

An item having a wire fill section of varying cross-sectional shapes securely twisted in a stem wire which is extended to form a handle, or it has a means for attaching a handle.

BRUSH,WIRE,BOILER TUBE

A sectional item used to clean the internal surfaces of boiler tubes, condenser tubes, heat exchanger tubes, and the like. It may be hand-operated or power driven and of the expanding or nonexpanding type. It does not contain a scraper.

SCREWDRIVER AND WRENCH ASSEMBLY

An assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

RIVET SET,HAND

A hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

PLATE,BENCH,STAKEHOLDER

A cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

DRIFT,DRILL

A wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

SWAGING TOOL,FLEXIBLE CABLE TERMINAL

PULLER,NAIL,HAND

A hand-held, hand-operated device, consisting of a handle fixed to a rammer which slides along a shaft having one pivoted jaw. The overall length may vary from 17 to 20 inches (431.8 to 508.0 millimeters) long.

SWAGE BLOCK,BLACKSMITH'S

CLAW,TACK

A hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

MATTOCK

RAKE,ASPHALT

A rake with a long metal shank to prevent burning of the handle. The shank, measured between the handle ferrule and the rake head, must have a length of at least 10 inches.

RAKE,ROAD

A rake with a metal head, the depth of which is greater than 3 1/2 inches (88.9 millimeters) but does not exceed 4 1/2 inches (114.3 millimeters). Excludes RAKE, ASPHALT.

RAKE,FORGE

A hand tool consisting of a handle and a metal head. The head may be of various shapes, such as triangular with a drop shank, or a curved head with a straight shank. It is used for stirring fuel in a blacksmith's forge.

BAR,SOCKET WRENCH HANDLE

A hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

VISE,AUTOMOBILE GLASS

A clamping device consisting of a base and two or more cushioned jaws. It is normally provided with a channel remover to remove channel from automobile glass, and with built-in anvil to straighten distorted channels. Designed with mounting holes for bolt or screw mounting to a bench, table, or the like.

STAKE,SHEET METALWORKING

RIVETER,BLIND,HAND

SCOOP,EASTERN PATTERN

A square pointed hand tool of open (hollow) back construction having a maximum blade width of 13-1/2 inches (342.9 mm). Refer to Reference Drawing Group BG before using item name.

SCOOP,SAND AND GRAVEL

A round point hand tool of open (hollow) back construction having a maximum blade width of 12 3/4 inches. It is normally furnished with a D-handle which consists of a steel tubular dee with a wood grip or spool. Refer to Reference Drawing Group BG before using item name.

SCOOP,WESTERN PATTERN

A square pointed hand tool of open (hollow) back construction having a minimum blade width more than 13-1/2 inches (342.9 mm). Refer to Reference Drawing Group BG before using item name.

SHOVEL,HAND

A tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

CAPS,VISE JAW

A pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

AWL,EYELET

BRACE,TRENCH

Aportable tool consisting of a tubular section with a round, threaded shaft, adjusting nut, and a bearing shoe at each end. Used to support the sides of trenches, ditches, and similar excavations.

TONGS,BLACKSMITHS'

Excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

FORCEPS,SHEET HOLDER

CAR MOVER,HAND

A tool consisting of a pinch bar and toggle action head, having compound leverage which provides force in imparting a turning motion to a railroad car wheel for moving the car.

CARRIER,TIMBER,HAND

A device consisting of a pair of hinged lug hooks, swivel connected to the center of a wooden handle, for the purpose of handling timbers or logs.

DIGGER,POSTHOLE,HINGED

CARRIER,STORAGE BATTERY,HAND

An item used to transport a battery in level position and provide positive placement control. It may consist of straps with battery post grips or adjustable tong type brackets with handles and battery case gripping jaws. It is designed to facilitate safe handling of a BATTERY, STORAGE and prevent breakage and accidental contact with spilled acid.

BAR,DIGGING

A tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

BAR,DIGGING AND TAMPING

Before using, refer to Reference Drawing Group AG.

BAR,TAMPING

BAR,TIMBER

Before using, refer to Reference Drawing Group AG.

FORK,RAIL

Before using, refer to Reference Drawing Group AG.

STRETCHER,WIRE

A hand tool which utilizes any of the various types of mechanical advantage, specifically designed with a wire gripping device to stretch barbed wire and/or single strand wire. See also PULLER, RATCHET LEVER, CABLE TYPE. Excludes BLOCK AND TACKLE and items with or without attachments when designed for multiapplication purposes, such as stretching fences, moving heavy equipment, setting machinery or the like, which require a hoisting and/or pulling action.

BLOCK,DOLLY,SHEET METALWORKING

PINCH-OFF TOOL,TUBING

A tool consisting of two opposed bars, attached by two hinged pressure bolts. Incorporated into the bars are two blades for temporarily closing tubing while making repairs, and various sized forming holes, used to open and restore the tubing to its original shape after repairs have been completed.

COMPRESSOR,PISTON RING

A hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

LIFTER,VALVE SPRING

A hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

PIKE POLE

A hand tool consisting of a wood handle with a steel pike, with or without hook, secured on one end.

AUGER,POSTHOLE,HAND

A tool consisting of a main stem with an earth boring device at one end and either a tee handle or accommodations for a tee handle at the other end. The earth boring device may be either a cylindrical bucket with adjustable or fixed blades, or a disk type open boring device with flat spiral shaped blades. The stem may be designed to accommodate sectional extensions or may be telescopic. Excludes DIGGER, POSTHOLE, HINGED and AUGER, EARTH BORING, HAND.

SLICKER,SADDLER'S

A single-bladed tool used to smooth or finish leather.

PAIL,PITCH POURING

LADLE,DECK SEAM FILLING

PULLER,FUSE

A hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

FID

A tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

FORCE CUP,PLUMBER'S

HOOKAROON

HOE,MORTAR

HOE,MORTAR MIXING

HAWK,PLASTERER'S

GROOVER,CONCRETE

Excludes jointer, brick.

WEDGE,TIMBER

Refer to Reference Drawing Group AD before using item name.

HOOK,CANT

BELLOWS,HAND

PRESS,LEAD SEAL,HAND

A plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

BEADING TOOL,HAND

A noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

MOLD,BATTERY TERMINAL POST

An item designed to be used as a form for building or rebuilding a tapered storage battery terminal post.

BURNISHER,JEWELER'S

A knifelike hand tool consisting of a shaped metal blade with or without a handle, used to smooth and polish metal.

CLAMP,BRAKE LINING

A clamp designed to smooth and position band-type brake lining for attachment to a brake shoe.

TAMPER,HAND

NEEDLE,CABLE LACING

A tool having an eye(s) or hook(s), specifically designed to sew lacing on electric cables.

HEADING TOOL,BOLT

HAMMER,HAND

A tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

HEAD,HAND HAMMER

EDGER,CONCRETE

A hand tool with a turned side edge having a specified radius at the bend. The handle is attached to the flat surface of the tool. An edger with the side edge turned up is considered an "inside type" whereas an edger with the side edge turned down is considered an "outside type." The end(s) may be curved or straight. It is used for finishing the edges of concrete sidewalks, paving, curbs and the like. See also CORNER TOOL, CONCRETE.

EXTRACTOR,LAMP

A hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

INSTALLING TOOL,TUBE PACKING RING

An item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.

PAN,DRIP,CABLE SPLICER'S

JEWEL PUSHER,HAND

A hand tool used for removing and replacing jewel settings (in watches and instruments).

BURNISHER,SLEEVE BEARING,HAND

A tool designed for smoothing out the bore of a cylindrical bearing.

DRESSER,LEAD PIPE AND CABLE

A hand tool of hard wood, used for straightening, bending, or dressing lead pipe or cable.

JOINTER,BRICK

PINCERS,CARPENTERS'

A plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.

PINCERS,FARRIER'S

A plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.

PINCERS,LASTING

A plierlike hand tool having two mating, serrated, curved jaws for gripping leather. The concave side of the tool contains a round or square hammer head. One handle end may contain a nail or tack pulling claw. See also PINCERS, CARPENTERS' and PINCERS, FARRIERS'.

LEAD JOINT RUNNER

A device, consisting of a piece of asbestos rope with clamp, for pouring lead in bell and spigot pipe joints.

HOLDER,WATCH PARTS,ANNEALING

VISE AND STAND,PIPE

A device consisting of a portable stand to which is attached a pipe vise. It may include a pipe bender.

PIKE,WIRE

A tool designed for positioning or reclaiming wires and/or cables. It consists of a slender pole terminated at one end with a combination hook and roller.

HAMMER-BRUSH,WELDER'S

A combination hand tool having a steel chipping head and an attached wire brush. It is used for chipping burrs and brushing slag and dirt from welds.

BENDING TOOL,PNEUMATIC TIRE VALVE

A hand-operated tool consisting of a base, bending block(s), and lever, used to bend VALVE, PNEUMATIC TIRE.

AUGER,PIPE AND SEWER,HAND

A flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.

AUGER,EARTH BORING,HAND

A boring tool with a double twist body, formed into a cutter head at one end and a shank at the other end. The shank may be designed to accommodate a tee handle, which may be included; or may be designed to be attached to pipe or pipe fittings. The tool is used for boring and/or tunneling into the earth. Excludes AUGER, POSTHOLE, HAND and BIT, AUGER.

ROLLER,HAND

A hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.

TROWEL

A tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.

LUBRICATION FITTING TOOL

A combination tool having an extracting and rethreading tap acting as a T-handle, with double end socket wrench, to remove worn or broken high-pressure grease fittings.

EXTRACTOR,STUFFING BOX AND PUMP PACKING

A rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

DRESSER,ABRASIVE WHEEL,HAND

A tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.

TONGS,RAILROAD TIE,HAND

SPOON,MINER'S

A hand tool used to remove loose earth and rock from bore holes to permit free entry of explosive charges.

EXTRACTOR,LAMP CAP

A tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.

KNOCKOUT TOOL,ENGINE VALVE SEAT INSERT

A tool with an offset point so designed that when the point is placed against the portion of a valve seat insert, a hammer blow will remove the insert.

REPLACING TOOL,ENGINE VALVE SEAT INSERT

BAR,BUCKING,RIVET

A hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

PRESS,GROMMET AND EYELET,FOOT-OPERATED

A device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is operated by foot pressure. See also PRESS, GROMMET AND EYELET, HAND OPERATED.

TWEEZERS,CRAFTSMAN'S

A hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

SHAPING TOOL,GLASS BLOWER'S,HAND

CRIMPING TOOL,TERMINAL,HAND

A hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

POT,MELTING

A pot of single or double wall construction, heated by direct exposure to heat or flame from combustible fuels, and used to melt soft metals and alloys, bitumens, wax, glue, and the like. Excludes KETTLE, HEATING, BITUMEN. See also POT, MELTING, ELECTRIC.

POT,MELTING,ELECTRIC

A pot of single or double wall construction, heated by self-contained electrical elements and used to melt soft metals and alloys, wax, glue, and the like.

HOLDING TOOL,VALVE,TIRE REPAIR

A metal hand tool with offset handle at one end and a threaded hole at the other end, designed to hold a damaged auto tire valve while making a replacement.

SCRIBER,DIAMOND POINT

TONGS,RAILROAD RAIL,HAND

PACKING TOOL,JOURNAL BOX,RAILWAY

See also EXTRACTOR, STUFFING BOX AND PUMP PACKING.

GRIP,CABLE,WOVEN

A braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.

NOZZLE,CAULKING GUN

An item of various configurations and opening size(s) through which semisolid materials are dispensed. It is usually designed to be threaded onto the end cap of a hand held tool.

PULLER,RAILWAY SPIKE,HAND

BENDER,RAIL,HAND

A tool designed to bend railway rails.

EXTRACTOR,SCREW THREAD INSERT

A tee handled tool with wedge shaped drive used to remove screw thread inserts.

TAMPER,ARMATURE COIL WINDING

A hand tool designed for tamping coil wires in slots of motor and generator armatures, prior to the installation of armature wedges.

DRIVER,ARMATURE WEDGE

A hand tool designed for inserting and driving a wedge into the armature core, or stator winding, when winding or rewinding an armature.

WRENCH,BASIN

A sliding tee handled wrench with jaw(s) designed to exert a turning force about an axis parallel with the leg of the handle. It is adaptable for close quarters and is used for basin nuts, ball cocks, and flush valves.

CLAMP,WIRE SPLICING

A tool designed for use in effecting a connection of bare electrical wires by twisting two wires together, or by twisting conductors contained in a single and/or double tube sleeve.

BRIDLE,WIRE STRINGING,COMMUNICATION LINES

A device for stringing communication lines in open pole line construction. It is a rigid frame item with loops for attaching wires, and it has facilities for transposition.

FLINT TIP,FRICTION IGNITER

An item consisting of a flint and mounting device for use with an IGNITER, FRICTION.

BURNISHER,PAPER,HAND

An item designed similar to a knife blade, without handle, having smooth surfaces, blunt rounded edges and ends; made of bone, plastic or metal. Generally used for smoothing and creasing several sheets of paper or rubbing down gummed materials; also as a useful tool in book repair.

HOOK,CARTRIDGE REMOVING,HAND

Refer to Reference Drawing Group AP before using item name.

HOOK,HELICAL SPRING PULLER,HAND

A hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.

HOOK,MANHOLE COVER,HAND

A hook whose bent end conforms to Style AP5 of Reference Drawing Group AP.

HOOK,STRAINER REMOVING,HAND

A hook whose bent end conforms to Style AP8 of Reference Drawing Group AP.

RIVETING IRON,EXPLOSIVE RIVET,ELECTRIC

A hand tool with various interchangeable tips, used to form the head on blind explosive rivets by detonating the charge in the shank end through contact of the heated tip.

EXTRACTOR,ELECTRON TUBE

A hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.

MANHOLE TOP ASSEMBLY

A metallic item consisting of a FRAME, MANHOLE and a COVER, MANHOLE which completely incloses the opening.

HOOK,BENCH,SWIVEL

A tool, consisting of a hook with a swivel piece attached to the end of a shank. It is used to catch and hold the cloth in position while making or repairing sails, awnings or similar items.

ORANGEWOOD STICK

An item of uniform diameter end to end, or of uniform diameter in the center section, with end(s) tapered either flat or conical. The tapered ends may be, but are not necessarily, of the same dimensions. See also SPUDGER.

BRUSH,WATER,MOLDER'S

A rubber bulb with a brass wrapped hair brush attached. It is primarily used in foundries to dampen sand along the edge of a pattern before drawing.

SCREWDRIVER,CROSS TIP

A manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.

SCREWDRIVER,CLUTCH TIP

SCREWDRIVER,JEWELER'S,SWIVEL KNOB

A manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.

SCREW STARTER,HAND

A hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.

SCREWDRIVER,SPARK TESTING

A manual screwdriver having an integral flash indicator.

ALIGNMENT TOOL,ELECTRONIC EQUIPMENT

An item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.

CLAMP,RUBBER TUBING,SHUTOFF

WEDGE,TOOL HANDLE

Excludes WEDGE, WOOD.

ADJUSTING TOOL,VALVE TAPPET

A hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.

BRANDING IRON

A device consisting of a handle and brand(s), which may have design(s), trade mark(s), letter(s), and/or number(s), and the like, which, when heated and applied to various materials such as wood, leather, paper or skin, marks same for identification.

RAMMER,MOLDER'S,HAND

A tool consisting of a peen and a butt, each at opposite ends of a handle. It is used for tamping or packing molding sand in foundry work. See also RAMMER, SAND, PORTABLE, PNEUMATIC.

LAPPER,POPPET VALVE,HAND POWERED

A hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.

MODELING TOOL,LEATHERWORKER'S

A hand tool used for working designs on leather.

SERVING BOARD,ROPE

A thin square piece of hardwood with a circular groove extending across the center of one face and a handle attached to the center of one side perpendicular to the groove. This item is used to wind spun yarn around the end of a rope to prevent ravel.

MARLINESPIKE

A metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.

COMPRESSOR SET,PISTON RING

A group of piston ring compressors having different characteristics. It may include tongs.

HOLDER AND INSERTED HAMMER FACE SET

A hand hammer of the inserted face style, consisting of a HOLDER, INSERTED HAMMER FACE and three or more of FACE, HAMMER, INSERTED.

CRIMPER,BLASTING CAP

A manually operated tool designed for fastening blasting caps to safety fuse.

AUGER,WATER CLOSET,HAND

A flexible coiled spring wire, with a boring head at one end and a crank handle at the opposite end. Both the handle shank and a portion of the spring wire are encased in a metal guide tube. The end of the guide tube opposite the handle is shaped into a single bend to facilitate entry into the water closet bowl. Excludes AUGER, PIPE AND SEWER, HAND.

BURNISHER,SCRAPER BLADE,HAND

A knifelike tool with a straight steel blade, round or oval in cross section, 2-1/2 (88.9 millimeters) to 5 inches (127.0 millimeters) long. It is used to burnished the cutting edges of scraper blades.

PUNCH,BACKING OUT

A hand tool designed with a straight cylindrical punch end for backing out punches, rivets, pins and the like. It is hammerlike in appearance and fitted with a wood handle. See also PUNCH, BLACKSMITH'S&#59; PUNCH, TRACK.

PUNCH,ALIGNING

A round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN&#59; PUNCH, DRIFT and DRIFTPIN.

PUNCH,DRIFT

A round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN&#59; PUNCH, ALIGNING&#59; and DRIFTPIN.

PUNCH,TRACK

A railway track maintenance tool, hammerlike in appearance, with or without handle. It is used for driving down spikes with broken heads, to drive out bolts, and the like.

KNIFE,PUTTY

A hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.

ADAPTER-EXTENSION,SOCKET WRENCH

A rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT

A connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).

EXTENSION,SOCKET WRENCH

An attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.

WRENCH,BUNG

A nonadjustable wrench specifically designed to remove or replace threaded bung(s) on oil, gasoline, or solvent drums. Excludes WRENCH, SPANNER. See also WRENCH, DRAIN PLUG.

RATCHET ATTACHMENT,SOCKET WRENCH

A connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.

HANDLE,EXTENSION,WRENCH

A tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.

ADAPTER,SOCKET,CROWFOOT SOCKET WRENCH HEAD

An item with one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having a square external plug to fit into the internal square drive of a SOCKET, SOCKET WRENCH.

HEAD,CROWFOOT SOCKET WRENCH

A component with a square internal drive eccentric to an open-wall opening designed to receive any of a series of wrenching sockets, adapters, or attachments. See also CROWFOOT ATTACHMENT, SOCKET WRENCH and SOCKET, CROWFOOT WRENCH HEAD.

SOCKET,CROWFOOT WRENCH HEAD

A component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.

CROWFOOT ATTACHMENT,SOCKET WRENCH

A wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.

BLADE,SOCKET HEAD SCREW KEY

A replaceable blade used in KEY, SOCKET HEAD SCREW.

WRENCH,PLIER

A wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.

WRENCH,TAP AND REAMER

A hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.

WRENCH,OPEN END

A nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.

WRENCH,BOX AND OPEN END,COMBINATION

A nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.

WRENCH,OPEN END BOX

A nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.

WRENCH,LINEMAN'S

An item having an opening at each end. Each end opening has two sizes. In addition, the larger end is provided with a hole for turning in standard pole steps.

BLOCK,BENCH,MECHANIC'S

A metal block with the working surface drilled and grooved. It is used for driving pins or dowels in round or flat work.

SWAGING TOOL,FLEXIBLE CONDUIT FERRULE

A hand operated device designed to attach a ferrule to the end of a flexible conduit.

ANVIL,JEWELER'S

A hexagonal shaped item used as a base for staking, riveting, and drilling small parts. It has hardened and ground surfaces. It may have milled slots and/or graduated holes.

WRENCH,TORQUE

A manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.

CLAMP,PLIER

An item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.

PRESS,GROMMET AND EYELET,HAND-OPERATED

A device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.

BAR,CAPSTAN

A straight barlike item used to turn a capstan head.

BAR,CLAW

Before using, refer to Reference Drawing Group AG.

SOCKET,WRENCHING,TUBE FITTING

An item specifically designed to remove and replace copper, brass, or similar soft metal fittings without damaging same.

BURNISHER,CONTACT,HAND

A handled item specifically designed for cleaning contact points of relays and the like.

VISE,PIN

A clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).

WRENCH,WHEEL STUD NUT,SHOCK TYPE

A manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.

WRENCH,WHEEL STUD NUT,GEARED SOCKET

A manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft having a geared head, while the outer nut is held stationary by a separate hexagonal holding wrench. It is designed to be activated by a standard socket wrench (lug wrench) when fitted to a single geared driving shaft or it may be activated by removable sliding bar handles for each of the gear driving shafts. Excludes WRENCH, SOCKET. See also WRENCH, WHEEL STUD NUT, SHOCK TYPE.

VISE,WIRE ROPE SPLICING

A clamping device which may be either a hand type consisting of two hinged jaws actuated by a single screw or a mounted type consisting of a base and three jaws. The jaws of the mounted type are screw actuated, either individually or by a single screw for horizontal jaws and an individual screw for the vertical jaws. It may have a swivel housing in base with brake for positioning splice in a given position.

SWAGE SET,BOTTOM AND TOP,BLACKSMITH'S

A group of SWAGE, BOTTOM, BLACKSMITH'S and SWAGE, TOP, BLACKSMITH'S having different sizes and characteristics.

SWAGE SET,BOTTOM,BLACKSMITH'S

A group of SWAGE, BOTTOM, BLACKSMITH'S of different sizes.

PUNCH,DAPPING

An item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.

CROWFOOT WRENCH ATTACHMENT,SOCKET HEAD SCREW

An attachment designed with a collar to fit into a HEAD, CROWFOOT SOCKET WRENCH having a hexagon plug (drive tang) extending therefrom.

REPLACER,VALVE KEY

A device designed to hold a split type key (keeper) while installing on the stem of an internal combustion engine valve.

FULLER SET,BOTTOM,BLACKSMITH'S

A group of FULLER, BOTTOM, BLACKSMITH'S of different sizes.

DRIFT PIN SET

A group of DRIFTPIN having different characteristics.

TIRE IRON

A single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.

TIRE REMOVING TOOL

A unit consisting of two matched metal items, one having a drop center hook at one end. It may or may not have a flat blade on the opposite end. The other item has a flat serrated or curved blade that fits through the drop center hook end. See Reference Drawing Group AY before using. See also TIRE IRON.

VISE,WOODWORKER'S

A clamping device consisting of a base, one or two jaws actuated by a screw or a cam and rack, and two guide bars, designed to be bolt mounted to a bench, table or the like. When so mounted, the jaw top(s) is flush with the top of the bench or table. Excludes VISE, PATTERNMAKER'S.

SWAGE SET,TOP,BLACKSMITH'S

A group of SWAGE, TOP, BLACKSMITH'S of different characteristics.

KEY SET,SOCKET HEAD SCREW

A group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.

VISE,SHEET METAL WORKER'S

A clamping device consisting of one stationary and one manual screw actuated jaw, and one or more guide bars or rods. The jaws are high tapered and extra deep and are normally smooth faced. Designed to be bolt mounted on bench, table, or the like. Excludes vises having pipe holding jaws. See also VISE, BENCH AND PIPE.

VISE,BLACKSMITH'S

A clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.

VISE,PATTERNMAKER'S

A clamping device consisting of a body, square guide beam, front jaw, back jaw, tilt jaw, tilt support with vise lock, screw, and screw handle. Designed to be bolt mounted to a bench, table, or the like and so constructed as to allow 360 degree rotation of jaws and a 90 degree tilt of the vise from the normal horizontal position to a vertical position. Capable of being locked at any angle of the tilt. See also VISE, WOODWORKER'S and VISE, MULTIPOSITION.

VISE,MACHINIST'S

A clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.

VISE,BENCH AND PIPE

A clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, each with integral or detachable pipe holding (serrated) jaws, and one or more guide bars or rods. Designed to be clamped or bolted to a bench, table or the like.

VISE,BENCH,CLAMP BASE

A clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.

VISE,JEWELER'S

A clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. The jaw width is 2 inches (50.8 millimeters) or less. Designed to be bolt mounted to a bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.

PUNCH,JEWELER'S STAKING TOOL

An item designed for use in conjunction with a staking frame for operations on watches and the like. It does not include a staking frame. See also STUMP, JEWELER'S STAKING TOOL.

STUMP,JEWELER'S STAKING TOOL

An item designed for use in conjunction with a staking frame for various operations on watches and the like. It does not include the staking frame. See also PUNCH, JEWELER'S STAKING TOOL.

RIVET SET ASSORTMENT,HAND

A group of two or more RIVET SET, HAND having different characteristics.

DRIFT PLUG SET,WOOD

INC 17814 REINSTATED ON 100517~A group of treated wood plugs and or pins of various diameters. They are cylindrical having a tapered end for inserting into a lead sleeve for smoothing same or expanding the ends of lead sleeves.

VISE SET,PIN

A group of two or more VISE, PIN having different characteristics.

WRENCH SET,OPEN END,FIXED

A group of WRENCH, OPEN END, FIXED having different characteristics.

PUNCH SET,CENTER,SOLID

A group of PUNCH, CENTER, SOLID having different characteristics.

PUNCH,PRICK

A round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a tapered needlelike point which is ground to an included angle of approximately 25 degrees to 30 degrees. Excludes PUNCH, CENTER, SOLID; PUNCH, COPPERING.

NAIL SET

A round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.

WRENCH SET,CROWFOOT,RATCHETING

A collection of various size SOCKET, CROWFOOT WRENCH HEAD; HEAD, CROWFOOT SOCKET WRENCH and handle(s). It may include universal joints, ratcheting adapters, and other attachments used therewith.

WRENCH SET,SOCKET

An assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.

WRENCH SET,OPEN END BOX

A group of WRENCH, OPEN END BOX having different characteristics.

WRENCH SET,COMBINATION BOX AND OPEN END

A group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.

WRENCH SET,BOX

A group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.

HOT LINE STICK

A hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.

OPENER,CRATE

An item consisting of either a double faced hammer head on one end of a handle and a claw on the other end of a handle or consisting of a combination hammer and hatchet head with a claw attached thereto. It is used for opening wood boxes, crates and the like.

SUPPORT,POLE RAISING

An item having a curved fork on upper end attached to either a pole handle or a collapsible crossed leg frame, with point(s) on the lower end(s) to prevent slippage, specifically designed for raising and positioning a wooden pole. See also PIKE POLE.

PIN STRAIGHTENER,ELECTRON TUBE

KETTLE,COMPOUND MELTING

A double jacketed teakettle style item used for melting solid materials, such as sealing or electrical insulating compounds. It is heated by direct exposure to flame from combustible fuels.

HANDLE,MATTOCK-PICK

LIFTER-SCRAPER,BATTERY TERMINAL

A plier-like tool used for removing cable terminals from battery posts and having a special release joint to dismember the plier, thus providing one section with a serrated nose for cleaning terminals and the other section with sharp jaws for scraping posts.

CONTACT POSITIONER,ELECTRON TUBE SOCKET

An item whose contact configuration is identical to that of a standard electron tube base and which is designed to be inserted into an electron tube socket for the specific purpose of rigidly restraining the displacement of the socket contact terminals while excessive heat is being applied on, or near the terminals as a result of a soldering operation.

HANDLE,TIMBER CARRIER

HANDLE,CANT HOOK AND PEAVY

An item made of nonmetallic material, designed to be attached to a metallic hinged hook, which may have a sharply pointed end. It is used to provide a grip for grasping and turning over logs.

NAIL SET ASSORTMENT

A group of two or more NAIL SET having different diameter points.

SPUDGER

A hand tool of nonconductive material with a conical point on one end and a chisel-like point on the other end. It is designed to locate or position electric leads in wired equipment.

EXTRACTOR SET,STUFFING BOX AND PUMP PACKING

A group of EXTRACTOR, STUFFING BOX AND PUMP PACKING having different characteristics.

TONGS,SHEET METAL WORKERS'

A long handled forged steel clamping tool having a wide jaw 6 inches (152.4 millimeters) or over in length. It may or may not have a locking ring at end of handle. Used to draw together sheet metal for cleating and/or for turning operations. See also TONGS, BLACKSMITHS'.

HOOKS,BAG HANDLING,HAND

A pair of hand held items, one right hand, one left hand, for handling bulky bagged items. Each consists of a rubber covered steel shank with a spur. Shank is attached to a handle at an angle of approximately 105 degrees.

SPOON,BODY AND FENDER

WRENCH KIT

An assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.

EXTRACTOR SET,TAP

A group of EXTRACTOR, TAP having different characteristics.

AWL,BELT

A small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like, for piercing small holes in wood, leather, and similar materials. The belt awl shall consist of a handle with a ferrule and a blade. The blade shall contain three holes of different sizes. The smallest hole will be toward the point end of the blades, and the largest hole will be located at the shank end.

AWL,SADDLER'S SEWING

An item consisting of a haft with replaceable straight sewing machine type or curved type needle(s) and/or straight diamond point type needle(s). The automatic type contains a bobbin in the haft.

AWL,BRAD

A small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.

AWL,SADDLER'S PEGGING

An item consisting of a blade or blades and a haft.

AWL,SADDLER'S HARNESS

An item consisting of one or more BLADE, SADDLER'S HARNESS AWL, and a haft.

PRICKER,SAILMAKER'S

AWL,SADDLER'S PAD

An item whose nominal length of blade is 4 inches (101.6 millimeters) or more but less than 5 inches (127.0 millimeters).

AWL,SCRATCH

An item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.

EXTRACTOR SET,SCREW

A group of EXTRACTOR, SCREW having different characteristics. It may contain drills.

JACK,SCREW,HAND

Excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.

JACK,SCISSORS,HAND

JACK,BUMPER

JACK,REEL,HAND

PICK,DIGGING

SPADE

A sturdy cutting and digging tool having a thick handle and a heavy flat blade that can be pressed into ground with the foot.

SPOON,TELEGRAPH

Refer to Reference Drawing Group BG before using item name.

INTRENCHING TOOL,HAND

A shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.

FIRE SHOVEL,HAND

A one-hand shovel used for firing solid fuel in stoves, forges, and the like. Excludes SHOVEL, HAND.

PEAVY

FLOAT,BELT,CONCRETE

A flexible, belt-like hand tool, made of rubberized canvas, having a handle, attached crosswise, at each end. It is designed for manually smoothing freshly laid concrete.

EXPANDER,PISTON RING

A plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.

BLOWTORCH,GASOLINE

BLOWTORCH,KEROSENE

BENDER,ELECTRICAL CONDUIT,HAND

A hand-actuated tool used for cold bending rigid electric conduit. It consists of a head having an opening to receive the conduit and has provision for attaching a pipe type handle. It may be furnished with or without a handle. Excludes benders for pipe, tube, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

WEDGE,JOINT BREAKING

Refer to Reference Drawing Group A before using item name.

BLADE,SADDLER'S HARNESS AWL

LIFTER,FOUNDRY,MOLDER'S

SPOON,FOUNDRY,MOLDER'S

MALLET,PLASTIC

MALLET,RAWHIDE

MALLET,RUBBER

MALLET,WOOD

Excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.

JACK,RACK BAR

Excludes JACK, BUMPER and JACK, REEL, HAND.

HOOK,SWITCH

An item consisting of a wooden pole with a metallic hook on one end for engaging the blade holes or pull rings of various type switches or cutouts usually located beyond normal reach. May have facilities for removing and inserting cartridge type fuses and may include provision for an electric ground.

PADDLE,SOLDER

An integral-handled wooden device with a smooth flat blade used to puddle or smooth melted solder on metals.

INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE

A bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.

REPAIR TOOL,PNEUMATIC TIRE VALVE

A four-way hand tool designed to repair valve stem cap threads, inside valve core threads, to smooth valve mouths, and to insert or remove valve cores for standard or large bore tire valves. See also INSERTER AND REMOVER, PNEUMATIC TIRE VALVE CORE.

PICK,BODY AND FENDER REPAIR

A tool designed with one end having a special curved or angled shape with a pointed or chisel like tip to insert under trimmings for straightening, and the other end either straight or tee handled. It is used in automotive body and fender repair. See also PUNCH, BODY AND FENDER REPAIR.

PUNCH,BODY AND FENDER REPAIR

A bar of steel having a straight or curved end and the other end flat for striking with a hammer. It is used in automotive body and fender repair.

DRIVER,GLAZIER'S DIAMOND POINTS

A D-shaped hand tool for driving diamond points into wood frames by triggered spring pressure. It includes a magazine for holding a supply of glazier's diamond points.

HOLDER,FLASK,GLASS BLOWER'S

SWAGING TOOL KIT,TUBE,HAND

A hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.

PUNCH,TUBE SWAGING,HAND

A noncutting punchlike tool, having a formed shank on one end and a flared head on the other, designed for enlarging inside diameters of ductile metallic tubing to permit insertion of tubing of the same size. In use, the tool is driven into the end of tubing clamped in a tube flaring bar which is not included with this item. See also SWAGING TOOL KIT, TUBE, HAND.

SETTER,SNAP FASTENER,HANDICRAFT

An item consisting of 2 dies and a spacing base to which is fastened 2 anvils. It is specifically adapted to space and set several size snap fasteners on such articles as gloves, purses, key cases and the like. Excludes setters designed for a specific size and type fastener.

STAKING TOOL,JEWELER'S

An item consisting of a staking frame and die, having additional punches and stumps. The punches may or may not be inverted and used as stumps. Used to remove and/or replace wheel staffs and the like. Excludes FRICTION JEWELING KIT, JEWELER'S.

CUTTERS,ABRASIVE WHEEL DRESSER

A group of steel disks having hardened cutting teeth around the perimeter, with separators (washers). Used as a replacement set in a revolving cutter type DRESSER, ABRASIVE WHEEL, HAND.

PUNCH,TUBE FLARING,HAND

A noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.

PUNCH,TUBE BELLING,HAND

A noncutting punchlike tool having a shaped head on one end which is designed to bell out and solidly seat the ends of condenser tubes, evaporator tubes, and the like when the tube is installed in the tube sheet. It is generally used after the flaring operation.

HAND SCREW

A clamping device consisting of two wood or wood faced jaws, actuated by two, handled, metal or wood spindle screws. The spindle screws operate independently to permit the jaws to be set at an angle to each other.

CLAMPING TOOL,STRAP BAND,HOSE

An item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.

RATCHET HEAD,SOCKET WRENCH HANDLE

A reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.

SLIDING T-HEAD,SOCKET WRENCH HANDLE

An item having a square male end designed to fit into the female end of a wrench socket or attachment and has provisions for a sliding bar, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH.

NEEDLE,ETCHING

A styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.

STITCHER,CEMENTING AND VULCANIZING

A hand-held item consisting of a metal circular disk on an axle attached to a handle. The width of the disk face is not more than 1/4 inch (6.35 millimeters).See also ROLLER, HAND.

FISHING TOOL,PNEUMATIC TIRE VALVE

A tool consisting of a chain having a cross handle at one end, and a swival fitting at the other end. The fitting is attached to the valve to bring the valve into exact position through the rim hole.

FRICTION JEWELING TOOL,JEWELER'S

A staking frame designed to hold the necessary tools for removing and replacing broken jewels, reaming jewel holes in plates and settings only. It includes tools such as holder for pusher(s), chuck and holder(s) for reamers, ball miller(s) and handle(s), hollow stump(s), flat stump(s), pusher(s), and reamer(s) fitted in a wood case. It does not include jewels. For items including jewels, see FRICTION JEWELING KIT, JEWELER'S. See also STAKING TOOL, JEWELER'S.

PULLER,MECHANICAL

A puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.

PULLER ATTACHMENT,MECHANICAL

CLAMPING TOOL,WIRE BAND,HOSE

A tool designed to tension a wire band around a rubber hose and the like, to clamp and hold fittings therein.

SNOW PUSHER

A handled item with a curved blade designed for pushing snow, cleaning walks and the like. See also SHOVEL, HAND.

BENDER SET,ELECTRICAL CONDUIT,HAND

A group of BENDER, ELECTRICAL CONDUIT, HAND having different characteristics. See also BENDER SET, TUBE, HAND.

BENDER SET,TUBE,HAND

A group of BENDER, TUBE, HAND having different characteristics. See also BENDER SET, ELECTRICAL CONDUIT, HAND.

CAULKING IRON SET,WOOD

A group of CALKING IRON, WOOD having different characteristics.

FORK,STONE

PLIERS,SLIP JOINT

A tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).

PLIERS,JEWELERS'

A tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).

PLIERS,TYPEWRITER REPAIR

A tool having jaws designed for use in typewriter repair operations, such as attaching, detaching, cutting, and aligning bars, keys, and the like. See also PLIERS and PLIERS (as modified).

PLIERS,BRAKE REPAIR

A tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).

PLIERS,RETAINING RING

See also PLIERS and PLIERS (as modified).

PLIERS,HOG RING STAPLE

Refer to Reference Drawing Group A. See also PLIERS; and PLIERS (as modified).

COMPRESSOR,VALVE SPRING

A hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.

HAFT,SADDLER'S AWL

SOCKET SET,SOCKET WRENCH

A group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.

SCREWDRIVER BIT SET AND HANDLE

An item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.

TONGS SET,BLACKSMITH'S

A group of TONGS, BLACKSMITHS' having different charactistics.

DRIFT SET,DRILL

A group of DRIFT, DRILL having different characteristics.

PUNCH SET,BLACKSMITH'S

A group of PUNCH, BLACKSMITH'S having different characteristics.

ASSEMBLY BLOCK SET,JEWELER'S

A collection of hollow formed blocks, designed for holding round watch movements during repair and/or assembly.

BIT SET,SCREWDRIVER

A group of BIT, SCREWDRIVER having different characteristics.

SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB

A group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.

WRENCH,TORCH AND REGULATOR

A nonadjustable tool having multisize openings for turning mixing head nuts, hose connection nuts, cylinder connection nuts, and the like on welding and cutting outfits.

MIRROR,INSPECTION

An item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.

SCREWDRIVER SET,CROSS TIP

A group of SCREWDRIVER, CROSS TIP having different characteristics.

SCREWDRIVER SET,CROSS TIP,STRAIGHT AND OFFSET

A group of SCREWDRIVER, CROSS TIP and SCREWDRIVER, OFFSET with cross tip(s) only, having different characteristics.

WRENCH SET,SPANNER

A group of items under WRENCH, SPANNER having different characteristics.

HANDLE,ASPHALT RAKE

An item consisting of a wood shaft having a ferrule at least 8 inches (203.2 millimeters) long, for use as a replacement handle for an asphalt rake.

SCREWDRIVER AND HOLDER,WATCH BALANCE SCREW

A manual screwdriver which is designed to insert and remove various sizes of watch balance screws. The item consists of a blade and a set of gripping jaws. It holds the screw by gripping the head while the blade is inserted in the slot.

NEEDLE,SADDLER'S SEWING AWL

JACK KIT,HYDRAULIC,HAND

An item consisting of one or more JACK, HYDRAULIC, HAND with various attachments to harness the ram action for pulling, clamping, lifting, spreading, pressing and/or bending in addition to the pushing action of the hydraulic hand jack.

WRENCH,PIPE,INTERNAL GRIPPING

A hand tool designed to be inserted into the end of nipples and pipes, and grip the inner surface by a cam or expansion action. It is used to turn items which may not protrude sufficiently to grip externally, or where an exterior plating or thread may not be marred. The tool is turned by applying a wrench to the protruding section.

SCREWDRIVER SET,OFFSET

A group of SCREWDRIVER, OFFSET having different characteristics.

SCREWDRIVER,FLAT TIP-CROSS TIP

A manual screwdriver having a single, reversible blade with one flat tip and one cross tip. The item is designed to securely retain the blade in the handle, yet permit instantaneous removal and insertion.

SOCKET,WRENCH,REFRIGERATION VALVE STEM

An item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.

BAR,EXPANDING AND TAMPING

PUNCH SET,DRIVE PIN

A group of PUNCH, DRIVE PIN having different characteristics.

PUNCH SET,ALIGNING

A group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.

PUNCH SET,DRIFT

A group of PUNCH, DRIFT having different characteristics. See also DRIFTPIN SET.

SOCKET,SLUGGING TYPE BOX WRENCH

An item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.

HOE,ASHPIT

A metal bar with one end having 90 degree (1.6 radians) rectangular scraper blade and the other end a ring shaped hand grip. It is used to remove ashes from the pit beneath boiler fires.

STEP PLATE,MECHANICAL PULLER

A circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.

CRIMPING TOOL,SHEET METAL PIPE,HAND

A hand tool designed for contracting the ends of sheet metal pipe by crimping. The crimping roll type consists of a set of two crimping rolls which are rotated by means of two handles and a ratchet. The length of crimp is adjustable. The formed jaw type is a plierlike tool having two mating formed jaws which form a single indentation with each closing of the jaws upon the metal.

PUNCH,CENTER,SOLID

A round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.

PULLER,RATCHET LEVER,CABLE TYPE

An item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.

TONGS,ICE

A metal device consisting of two blades riveted together at a common axis in such a manner, that when the upper ends are forced together in the act of lifting, the points on the lower ends grip the piece of ice to be lifted. Excludes TONGS, MATERIAL LIFTING.

ADJUSTING TOOL,BRAKE SHOE

A bar of steel having flat, angled, blade ends designed to insert through the slot in a brake back plate to turn the brake shoe adjusting nut by a prying action.

RIVETER,YOKE,HAND

A hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.

SUPPORT,HOT LINE STICK

A device consisting of a base with a mounting device of various designs to support the end of HOT LINE STICK. The base is designed to fit against power line poles and contains a snub chain with a clamping device to hold the support in place.

TUNING WAND,ELECTRONIC EQUIPMENT

A hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.

HOLDER,INSERTED HAMMER FACE

A HAMMER, HAND of the inserted face style, furnished without FACE, HAMMER, INSERTED.

WRENCH,OPEN END AND SPANNER,COMBINATION

A tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.

ADAPTER,TURNBUCKLE,CROWFOOT SOCKET WRENCH HEAD

A wrench component with one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end designed to slide over and partially encircle a round body type TURNBUCKLE. A removable drive pin, extending through the center of the turnbuckle opening at right angles, provides a means of locking the adapter to the TURNBUCKLE for turning to reduce or increase tension.

HANDLING TOOL,DASHPOT

A specially designed handling tool consisting of a handle fixed to a rammer which slides along a shaft having one C-clamp type adjustable jaw.

HANDLING TOOL,DETENT

A specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.

WRENCH,BATTERY FILLER CAP

A specially designed hand tool, consisting of a bar, one end of which is knurled, and the other end of which is equipped with pins to fit into matching holes of a FILLER CAP, BATTERY.

CLAMP,CANTILEVER JAW

A clamping device consisting of two L-shaped members, the long leg of one attached to, and pivots on, the long leg of the other member. Both short legs of each member terminate in freely rotating square pressure pads. One face of each pressure pad has a V-groove. The clamping operation is actuated by a screw which pivots on both members. It is used for holding round or flat objects with parallel or nonparallel surfaces.

CLEANER,BURNER SLOT,GASOLINE FIELD RANGE OUTFIT

One angular-shaped metal hand tool used exclusively for cleaning the slots of the gasoline burner which is a component of a RANGE OUTFIT, FIELD, GASOLINE.

CLEANER,FRONT GENERATOR TUBE,GASOLINE FIELD RANGE OUTFIT

A metal, slender, cylindrical shaped hand tool which is used exclusively for cleaning the gasoline burner front generator tube of a RANGE OUTFIT, FIELD, GASOLINE.

CLEANER,FUEL JET,GASOLINE FIELD RANGE

A hand tool having a conical-shaped cutter specifically used to clean the fuel jet of a gasoline field range.

TAMPING POLE,DYNAMITE

A long straight wooden item of approximately 1 1/2 inches to 2 inches (38.1 millimeters to 50.8 millimeters) in diameter, fabricated in sections of equal length. Generally, the forward end of the first section is equipped with a round wooden block, and the other section ends provided with suitable nonsparking couplings. When assembled it is used to push and tamp dynamite into a blasting hole. Excludes TAMPING, ROD, SOIL TESTING.

PUNCH SET,TUBE SWAGING,HAND

A group of two or more of PUNCH, TUBE SWAGING, HAND. For items that include a tube flaring bar, see SWAGING TOOL KIT, TUBE, HAND.

HOOK,MATERIAL HANDLING,HAND

A hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND&#59; HOOK, WIRE BREAKING, HAND&#59; HOOK, ROCK CRUSHER FEEDING, HAND&#59; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.

RETRIEVING TOOL,MAGNETIC

A hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.

ADAPTER,MECHANICAL PULLER

An item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.

HANDLE,SPANNER WRENCH

A hand tool designed to mate with the threaded end of a spanner wrench or it is unthreaded and designed to slip onto the wrench. It is used to provide leverage.

INSERTER,GAS FILLING VALVE GASKET

A metallic tool consisting of a cylindrical pilot which fits into a tubular follower and guide. It is used to install a gasket on a gas filling valve of a hydropneumatic mechanism, such as a RECOIL MECHANISM (as modified), and the like.

STOP,HAND SCREW JACK EXTENSION

A metallic item which is attached to the end of an EXTENSION, HAND SCREW JACK to prevent its removal from the mating part of a JACK, SCREW, HAND.

CAP,HAND SCREW JACK EXTENSION

A metallic item with a centrally located hole which holds an EXTENSION, HAND SCREW JACK in position and retains a BEARING, ROLLER, THRUST. It is designed to bear the weight of an object while raising or lowering a JACK, SCREW, HAND.

WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT

An assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.

WRENCH,BOX AND OPEN END BOX,COMBINATION

A double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.

WRENCH SET,COMBINATION BOX AND OPEN END BOX

A group of WRENCH, BOX AND OPEN END BOX, COMBINATION having various sizes.

BAR,WEAPONS HANDLING

Before using, refer to Reference Drawing Group AG.

PIN STRAIGHTENER,ELECTRICAL CONNECTOR

A hand tool designed with a longitudinal hole in one or both end(s) to fit over a pin contact of an electrical connector. It is used to straighten or align the contact(s) of the connector.

FORCING SCREW,MECHANICAL PULLER

A cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.

INSERTER,SCREW THREAD INSERT

A tool designed to install a SCREW THREAD INSERT.

SCREWDRIVER SET,FLAT TIP

A group of SCREWDRIVER, FLAT TIP having different characteristics.

WRENCH SET,SOCKET,FINGER TIP

A group of socket wrenches specifically designed to fit over the end of the finger. The finger is then used as a handle. These wrenches are used in close quarters where it is not practical to use any other type of wrench.

CONTACT POSITIONER,TERMINAL CRIMPING TOOL

A device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.

EXTENSION,SCREWDRIVER BIT

An item having one end designed to fit into the end of a screwdriver bit handle and the opposite end designed to accommodate a screwdriver bit. It is specifically designed to extend the length of a screwdriver bit.

MULTIPLIER,TORQUE WRENCH

A device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.

BUSHING DRIVER SET

A group of various sized bushing drivers designed to install and remove bushings. It may include driver nuts, adapters, and the like.

WRENCH SET,PIPE,INTERNAL GRIPPING

A group of WRENCH, PIPE, INTERNAL GRIPPING having different characteristics.

TANG BREAKOFF TOOL,SCREW THREAD INSERT

A punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.

VISE,MULTIPOSITION

A clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.

WRENCH,ADJUSTABLE

A single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.

WRENCH,RATCHET

A single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.

HANDLE,AUGER

A replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.

HANDLE,HAMMER

HANDLE,MALLET

HANDLE,POSTHOLE DIGGER

HANDLE,SHOVEL

SPANNER ATTACHMENT,SOCKET WRENCH

An item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.

WRENCH SET,TORQUE

An assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.

INSTALLATION TOOL,RETAINING RING

An item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.

TACKER

A hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).

PARTS KIT,HYDRAULIC JACK

SPANNER ATTACHMENT SET,SOCKET WRENCH

An item having an adjustable or fixed span of pin and/or key type ends that may be replacable.

INSERTER SET,BEARING AND BUSHING

A group of two or more INSERTER, BEARING AND BUSHING having different characteristics.

INSERTER,BEARING AND BUSHING

A hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.

REMOVER,BEARING AND BUSHING

A hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).

INSERTER,SEAL

A hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.

REMOVER,SEAL

A hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).

INSERTER,ELECTRICAL CONTACT

A hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.

REMOVER,ELECTRICAL CONTACT

A hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.

INSERTER,PREFORMED PACKING

A hand tool designed to install a PACKING, PREFORMED.

REMOVER,PREFORMED PACKING

A hand tool designed to remove a PACKING, PREFORMED.

GUIDE,DRILL

An item designed to center a drill for drilling a hole in a semifinished product or workpiece.

CRIMPING TOOL,FIBER OPTIC CONTACT,HAND

A hand held tool designed to install various types of CONTACT, FIBER OPTIC on optical conductors.

INSTALLATION TOOL,CONNECTOR FIBER OPTIC CONTACT

An item designed to facilitate the placement of CONTACT, FIBER OPTIC items into CONNECTOR, PLUG, FIBER OPTIC or a CONNECTOR, RECEPTACLE, FIBER OPTIC.

REMOVAL TOOL,CONNECTOR FIBER OPTIC CONTACT

An item used to disassemble CONTACT, FIBER OPTIC from a CONNECTOR, PLUG, FIBER OPTIC or a CONNECTOR, RECEPTACLE, FIBER OPTIC.

JACK,LEVELING-SUPPORT

A device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).

SCREWDRIVER,SQUARE TIP

A manual screwdriver having a single nonremoveable blade with a tip for driving and removing screws with a square recessed head.

SCREWDRIVER,SIX POINT TIP

A manual screwdriver having a single nonremoveable blade having a tip with six rounded points.

INSERTER AND REMOVER,SEAL

A hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.

INSERTER AND REMOVER,BEARING AND BUSHING

A hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.

INSERTER AND REMOVER,PREFORMED PACKING

A hand tool designed to install and remove a PACKING, PREFORMED.

REMOVER,PIN

A hand tool designed to facilitate the removal of a pin from a hole.

INSERTER AND REMOVER,PIN

A rodlike tool designed to facilitate the insertion and removal of a pin from a hole.

INSERTER AND REMOVER,ELECTRICAL CONTACT

A hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.

INSERTER,PIN

A hand tool designed to facilitate the insertion of a pin into a hole.

INSERTER AND REMOVER SET,BEARING AND BUSHING

A group of two or more INSERTER AND REMOVER, BEARING AND BUSHING having different characteristics.

INSERTER,PISTON

A tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.

CLAMP,GENERAL SURGERY

An item designed to be used as a multi-purpose device in surgical operations and operative procedures.

INSERTER AND REMOVER,SPRING

A tool specifically designed to facilitate the installation and/or removal of springs.

REMOVER,STUD

An item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.

INSERTER,STUD

A device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.

INSERTER AND REMOVER,STUD

A group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.

REMOVER SET,STUD

A group of various sized items designed to remove or extract studs. It may include guides, collets, collet housings, holders, and the like. It is without facilities to drive or set studs. See also INSERTER AND REMOVER, STUD AND INSERTER, STUD.

INSERTER,GEAR

A hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.

DIE,CRIMPING TOOL

An item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.

INSERTER,ELECTRICAL CONNECTOR

A hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.

JACK SET,LEVELING-SUPPORT

Consists of two or more JACK, LEVELING-SUPPORT.

GUARD ASSEMBLY,BLADE

BURNISHER,OPTICAL FIBER,HAND

A hand-held, hand-operated item designed to polish the ends of FIBER, OPTIC to a smooth surface.

FLOAT

A tool used for concrete, plastering and grouting work.

PULLER SET,MECHANICAL

Two or more separate PULLER, MECHANICAL of different fixed sizes.

PNEUMATIC BAG,LIFTING

A device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.

PNEUMATIC BAG KIT,LIFTING

A collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.

INSTALLATION TOOL,CABLE TIE

A lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.

FORCEPS,NONSURGICAL

A device designed to hold another item by grasping it in its jaws and retaining the grasp with a snap-lock type catch on its handles. It will have straight or curved, needle nose type jaws and handles with thumb and finger holes. For items designed for surgical use see FORCEPS (as modified). For items without a catch type device on the handles see PLIERS and PLIERS (as modified). See also HEAT SINK, SOLDERING AID.

INSTALLATION TOOL,BEARING STAKING

A hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.

WRENCH SET,RATCHET

DISPENSER,SEALANT

A hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.

PLIERS SET,RETAINING RING

A group of PLIERS, RETAINING RING having different characteristics.

SCREWDRIVER SET,SIX POINT TIP

A group of SCREWDRIVER, SIX POINT TIP having different characteristics.

WRENCH,FUEL CAP,ACCESS AND REMOVAL

A specially designed hand tool, consisting of a screwdriver, cross tip at one end, a turnlock fastener tool at one side and on the other side a deep slot to fit over opening/closing tabs of a CAP, FILLER OPENING.

COMPRESSOR,SPRING,PARACHUTE PACKING

A specially designed hand tool (holding device), which includes mounting holes with which the compressor is secured to a chute packing table, which facilitates the packing of a pilots parachute.

CARRIER,ARMAMENT SUBSYSTEM,HAND

A metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.

COMPRESSOR,TOOL,PEDAL ADJUSTMENT

A hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.

TIP SET,PLIERS,RING RETAINING

A collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.

EXTRACTOR,ELECTRICAL CONNECTOR,PLUG

A hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.

TOOL BASE,BEARING INSTALLATION

The base of a hand tool used for seating bearings. It may be attached to a DRILLING MACHINE (as modified) to secure bearings wherever necessary to contain the bearing within its assembly.

ADAPTER SET,TORQUE WRENCH

TWO or more ADAPTER, TORQUE WRENCH of different sizes.

TORCH,GAS

An item used for sweating, brazing, thawing, soldering, and the like, using concentrated heat obtained from combustible gases/gaseous mixtures.

INSERTER AND REMOVER,ELECTRONIC COMPONENT

An item which can insert or remove an electronic component package such as MICROCIRCUIT&#59; RESISTOR, NETWORK (as modified)&#59; and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT&#59; REMOVER, ELECTRICAL CONTACT&#59; EXTRACTOR, ELECTRICAL CARD&#59; EXTRACTOR, ELECTRONIC CRYSTAL UNIT&#59; EXTRACTOR, ELECTRON TUBE.

SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE

An item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.

EXTRACTOR,FUEL INJECTION NOZZLE

A hand tool designed specifically for extracting fuel nozzles from an internal combustion engine.

HANDLE,TORQUE

A bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.

COMPRESSOR,INJECTOR SPRING

A hand tool designed to compress injector springs. Excludes COMPRESSOR, VALVE SPRING.

JAW,VISE,HAND

An item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.

PICK HEAD,DIGGING

An iron or steel double-tinted tool with provision for a handle to be inserted in an eye between the ends. The ends of the tines may both be pointed or one pointed and one chisel edge or flat faced. It is used for mining, roadmaking and stone dressing. Does not include a handle. See also PICK, DIGGING.

HANDLE,SCREWDRIVER

An item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.

TOOL,SETTING,EXPANSION SHIELD

A setting tool specifically designed to expand shields to fix them into hollow walls built with canty concrete blocks, gypsum boards, hollow bricks and the like.

PUNCH,CLINCHING,TURNLOCK FASTENER

A hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.

BLOCK,CLINCHING PUNCH,TURNLOCK FASTENER

A hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is held gainst the underside of the sheet metal while the surface is struck with a PUNCH CLINCHING, TURNLOCK FASTENER.

STRAIGHTENER,FIN

An item designed to straighten refrigerator evaporator fins, heat exchanger fins and the like.

PLIERS,WIRE TWISTER

An item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.

PLIERS,SLEEVE STRETCHING

A pair of pliers fitted with a two or three prong chuck. It is designed to install sleeves or identification bushings on the end of wire leads or cables. Excludes: COMPRESSING TOOL, SPLICING SLEEVE and CRIMPING TOOL, TERMINAL HAND.

SCREWDRIVER ATTACHMENT,SOCKET WRENCH

An attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.

CROWFOOT ATTACHMENT SET,SOCKET WRENCH

A group of various sized CROWFOOT ATTACHMENT, SOCKET WRENCH. It may include a holder or the like. Excludes WRENCH SET, CROWFOOT, RATCHETING.

MIRROR HEAD,INSPECTION

A device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.

BODY,PULLER,MECHANICAL

An item designed to support and enclose the internal parts of a PULLER,MECHANICAL.

SCREWDRIVER SET,FLAT TIP AND CROSS TIP

A group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.

POINT KIT,SCRIBER,MACHINIST'S

A group of two or more points used for the repair or replacement of worn or damaged points of a SCRIBER, MACHINIST'S.

SEPARATOR,PRECISION WORK

A small metal rod having one or more small steel points or forks or a combination of them. It is used for doing precise separation or positioning work in various areas such as micromechanical and the like. Excludes SCRIBER, MACHINIST'S.

SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH

A set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH

WRENCH,OIL FILTER

A wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.

TWEEZERS SET,CRAFTSMAN'S

A collection of TWEEZERS, CRAFTMAN'S having different characteristics.

INSERTER AND REMOVER,TURNLOCK FASTENER

A hand tool designed to insert or remove a FASTENER ASSEMBLY, TURNLOCK.

NOSEPIECE,RIVETER,BLIND

An item specifically designed for use with a RIVETER, BLIND (as modified).

MANDREL,RIVETER,BLIND

An item specifically designed for use with a RIVETER, BLIND (as modified).

ADAPTER,TORQUE WRENCH

An adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.

ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT

A single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.

ALIGNING TOOL,ROTATING MEMBERS

A tool used to partially rotate one of two rotating members for alignment during assembly.

ALIGNMENT PIN,FINAL DRIVE ASSEMBLY

A special designed pin used in the assembling of the final drive.

ARM,HANDLING TOOL

COMPRESSING TOOL,SPLICING SLEEVE

A hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.

EXTENSION,HAND SCREW JACK

A length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.

EXTRACTOR,ELECTRONIC CRYSTAL UNIT

FIXTURE,TRACK CONNECTING,FULL TRACKED VEHICLE

A fixture used to pull together two track ends, of a full tracked vehicle, for the purpose of connection. May also be used for holding the tension of a track while replacing a link.

FORK,CASTER,HAND

A hand tool designed to rotate casters to a locking position while under stress of the load imposed thereon.

GEAR ADAPTER,PULLER,MECHANICAL

An adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.

HANDLE,HYDRAULIC JACK

HANDLE,MECHANICAL JACK

HOLDING TOOL,PROJECTILE

A hand tool specifically designed to facilitate the holding of a projectile in a fixed position during assembly and/or disassembly operations.

PLIERS,BUSHING EXTRACTING

A tool having special shaped jaws designed for use in extracting bushings.

PULLER,RECOIL MECHANISM PISTON ROD

A puller specially designed for maintenance of a hydrospring recoil mechanism. Excludes PULLER, MECHANICAL.

RESIZING TOOL,FEMALE ELECTRICAL CONTACT

A tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.

SCREWDRIVER AND SOCKET WRENCH COMBINATION

A hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.

SWAGING TOOL KIT,HOSE FITTING,HAND

A device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.

LEVER TOOL,CATCH

A specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.

WRENCH,IMPACT,MANUAL

A manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.

TIP,AUTOMATIC CENTER PUNCH

An item made from hardened metal designed to be attached to the end of a PUNCH, CENTER, AUTOMATIC for making indentations. The attaching end must be threaded or have other means of attaching.

KEY,RESET,COMBINATION LOCK

An item specifically designed to be inserted in a combination lock to allow free movement of the tumblers and setting of a desired combination.

PULLER KIT,STAKE

A collection of items, such as a tripod, pulley, and retrieving cable, specifically designed for rapid extraction of ground rods, stakes, and the like, used to ground or anchor equipment(s). It is normally used with a special sling, and may include a storage bag or case. Excludes PULLER, MECHANICAL and PULLER KIT, MECHANICAL.

STAND,RIVETER

An item specifically designed for holding and supporting a RIVETER (as modified), during assembling operations. It may have features for height adjustment, and/or positioning of the riveter.

PLIERS,ELECTRONICS

A tool with clamping jaws for special works in the field of microelectronics and on circuit boards. See also PLIERS and PLIERS (as modified).

DRIFT

An item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.

PARTS KIT,FLARING TOOL,TUBE,HAND

A group of parts used to replace worn or damaged parts of a FLARING TOOL, TUBE, HAND.

TAPE,FISH

Excludes FISHING TOOL, ELECTRICAL LEAD.

NUTDRIVER

A non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.

REMOVAL TOOL,LOCKING DEVICE

A hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.

HOLDING TOOL,ROTOR,MAGNETIC

A tool used for holding a ROTOR,MAGNETIC during maintenance or repair operations.

WRENCH,RATCHET,PALM-GRIP

A round or contoured comfortable hand grip with a ratchet-mechanism and a shifting lever for reversing the ratchet direction. It has a square male drive with a spring-load steel ball to hold mating sockets and attachments. Excludes WRENCH, RATCHET and HANDLE, SOCKET WRENCH.

INSERTER SET,SEAL

A group of two or more INSERTER, SEAL having different sizes and characteristics.

NUTDRIVER SET

An assortment of NUTDRIVER'S having various sizes, all of which have a screwdriver style handle, shaft and formed female hex or square socket at the driving end.

SCREWDRIVER,OCTAGONAL TIP

A manual screwdriver having a single nonremovable octagonal tip blade.

ADJUSTING TOOL,SWITCH

An item used to adjust the quick acting mechanism of a SWITCH, SENSITIVE and other switches as modified.

INSTALLATION TOOL,BALL JOINT

An item used to mount a BALL JOINT.

REMOVAL TOOL,BALL JOINT

An item used to remove a BALL JOINT.

PUNCH SET,DRIFT AND DRIVE SET

An item consisting of a PUNCH SET, DRIFT and a PUNCH SET, DRIVE PIN.

SPLICING KIT,FIBROUS ROPE

A collection of items to facilitate connecting ends or making loops in similar pieces of braided or twisted synthetic or natural fibers. Item includes fids, pushers and the like.

HEAD,CRIMPING TOOL,HYDRAULIC FITTING

A component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.

EXTENSION SET,SOCKET WRENCH

A group of EXTENSION, SOCKET WRENCH having various characteristics.

SCREWDRIVER,TORQUE

A manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

JACK,RATCHET DRIVEN

A multi-function mechanical ratchet type jack that can be used for lifting, pushing, pulling, and clamping. Includes adjustable top clamp clevis for use in pulling and clamping operations.

BROOM,MAGNET

A magnetic hand-pushed item designed to pick up nails or other metal objects from various surfaces. It usually has wheels. For items which are trailer mounted or designed for trailer, truck and/or tractor mounting, see MAGNETIC,SWEEPER,ROAD.

REMOVER,STAKE

A hand tool designed to facilitate the removal of a STAKE (as modified) from the ground.

REMOVER,CLIP

A tool specifically designed to facilitate the removal of a clip (as modified).

PUNCH,STARTER

A hand tool for installing and removing pins and keys and removing rivets. The point is tapered round with a blunt face. Excludes PUNCH, CENTER, SOLID.

PULLER,NAIL,FARRIERS'

A hand tool designed to remove nails from a HORSESHOE.

TONGS,HOT FITTING,HORSESHOE

A hand tool designed for horseshoes without clips to grab or hold securely a hot HORSESHOE for hot fitting to the hoof.

WRENCH,COMBINATION,SPECIAL PURPOSE

A tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.

INSERTER,CLAMP,LOOP

An item designed for installing the different elements of a CLAMP, LOOP.

BREAKER-RIVETER,CHAIN,HAND

A hand tool designed to break and rivet transmission chains of BICYCLE; MOTOR CYCLE; and the like. The item may include accessories and/or transporting case.

BAR,BENDING,REINFORCING BAR

A hand tool designed to bend concrete reinforcing bars. Excludes, BENDER, TUBE, HAND.

HOLDER,SCREWDRIVER BIT

An attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

REMOVAL TOOL,AUTOMOTIVE TRIM

A hand tool designed to remove automotive trims from their support without damaging them. It generally consists of a steel shank having sort of claw formed on one end and a handle to the opposite end.

ADJUSTING TOOL,TRACK SHOE

An item used to adjust the bushing in a track shoe.

POLE,TELESCOPING

An item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

EXTENSION,POLE

An item designed to be mounted on a telescopic or rigid pole that is used to increase its length.

ADJUSTING TOOL,REGULATOR SPRING

An item designed to adjust the spring of a regulator balancing chamber.

REMOVER,HOSE

A hand tool designed to remove a hose, a hose assembly, a HOSE,PREFORMED and the like.

EXTRACTOR SET,LAMP

A group of EXTRACTOR,LAMP having different characteristics.

NOZZLE,SYRINGE,BATTERY

An item designed to be fixed on a syringe to adjust the electrolyte level of a BATTERY STORAGE. The item can be a part of a TOOL KIT, BATTERY.

NUT SPLITTER

A tool with a chisel which breaks the nut under the pressure applied by the tightening of a screw. It is designed to remove corroded, jammed, or damaged nuts.

BAR SET,PRY

A group of PRY Bars having different characteristics.

PICK AND HOOK SET,HAND

A group of two or more hooks having different sizes and characteristics for insertion and removal o-rings, gaskets and springs.

WRENCH,STRAP

Wrench which primarily consists of a handle provided with a strap or girth. It is designed to impart a rotary movement of force to a cylindrical part or without footprint for tool receiving. For items specially designed for oil filters or tubes see CLE,OIL FILTER (53484) or CLE TUBE CLAMP (03492).

TONGS,HANDLING,REMOTE

An item designed to remotely pick up, move and/or manipulate objects. It usually consists of a control handle equipped with a rod and a tongs head. It may be used for picking up waste, taking contaminated objects, manipulating in laboratory glove boxes or hot cells, and the like. It may have accessories such as one or more extensions, a leak-tight coupling (alpha adaptor), and the like. Excludes TONGS, LABORATORY and REACHER, INSTRUMENT, PATIENT.

PULLER,COTTER KEY

A hand tool with a curved tip for prying loose cotter keys (pins).

SCREWDRIVER AND NUTDRIVER SET

A group of SCREWDRIVER (as modified) and NUTDRIVER in different sizes.

PULLER SECTION,MECHANICAL

An item which constitutes a part of a PULLER,MECHANICAL (18913). Do not use if a more specific designation is appropriate. Excludes: BODY,PULLER,MECHANICAL (53210)&#59;STEP PLATE, MECHANICAL PULLER (20185).

RAM,BATTERING

INC 80642 REINSTATED ON 10182017: A heavy metal bar with one or more handles designed to batter down doors or windows, to breach brick walls, and the like.

AUGER SET,EARTH BORING,HAND

A group of AUGER,EARTH BORING,HAND (06193) having different dimensional characteristics.

ADAPTER-EXTENSION,QUICK ADJUSTING SCREW CLAMP

An adaptor designed for combining two CLAMP,SCREW,QUICK ADJUSTING which are not designed for direct mating to each other to expand the total clamping span.